ABB 6136/100C-102-500 Bedienungsanleitung Seite 64

ENG
Displaying ● Select the desired room thermostat.
and/or
● The current operating mode is displayed
modifying
and can be changed if necessary.
the room
thermostat
● Select the operating mode to be changed.
● Confirm your entry with "OK".
6.6 Time programmes
All switching functions for lighting, blinds or the heating system can also be controlled
automatically using time programmes. A consumer, e.g. a lamp can be switched ON or OFF on
certain days, every day or during the weekend only if desired.
A maximum of 20 electrical units of the KNX can be controlled at 20 different times
each. This allows up to 400 time functions.
Access to the time programmes can be completely blocked or safeguarded by a PIN code. Now
the time programmes cannot be opened or modified by the user. In this case contact your
electrician (see also chapter "Setting of PIN code").
20
Fig. 31