Werbung
Verfügbare Sprachen
Verfügbare Sprachen
ENG
6.9
Controlling blinds/roller blinds
All blinds and roller blinds integrated into your KNX system can be controlled if this
has been configured in your project.
Manual
● To control the roller blind, select e.g. the
control
button "Roller blind" on the start page and
then the corresponding button.
● Use the arrow keys to move the
blinds/roller blinds up or down.
● Press briefly to stop and adjust slats.
● Press long to move up or down.
For information about roller blind control by time programme, see chapter: "Calling
Control by
time pro-
up/modifying time programmes".
grammes
30
Fig. 52
Werbung
