Beko BHCI98841BBHSI Bedienungsanleitung Seite 16

Hood and hob combined working (Hob to
Hood function)
If you have a hob equipped the "Hob to
Hood" function on top of a hood, you can
connect your hood and hob together and
have your hood operate automatically ac-
cording to the cooking level of your hob.
Pairing the hood and hob
To match your hood and hob, touch the ""
" " button for about 2 seconds with the
hood switched off. The " " button flashes
on the display. Meanwhile, touch the cor-
responding button on your hob (see hob
manual). The " " button on the display
lights up continuously when the pairing is
done. The hob and hood are paired.
Canceling the hood and hob connection
If you do not want your hood and hob to
work together, touch the corresponding
button on the hob (see hob manual) or the
" " button on the hood to cancel the pair-
ing. The symbol on whichever product you
have touched goes out, the corresponding
button on the other product flashes for a
while and then goes out completely.
In case of interference in any speed
level while the "Hob to Hood" func-
tion is active, the feature is can-
celed and the cooker-hood is dis-
connected.
Using the HomeWhiz application
Follow the steps described below to control
and monitor your hood via a smart device.
You shall connect your tablet to your home
network, and download the HomeWhiz ap-
plication to your smart device from the app
store of your smart device.
1. Open the application downloaded via
your smart device.
2. Press "add/remove product" section on
the smart device.
3. Perform the installation by following the
instructions provided on the smart
device.
4. Keep the function key pressed for about
5 seconds. The " " symbol shall flash
on the display.
5. Connect to your hood with the user
name and password given on the app
from the settings section of your smart
device.
6. Select the network you are using from
the network list and connect your hood
to the network with the required pass-
word. The " " symbol shall be displayed
continuously when the installation is
complete. You may enter your app and
start to use your hood by naming it from
the "add/remove product" section.
If it is not possible to establish a
network connection within 5
minutes after pressing the function
key for about 5 seconds, the install-
ation of homewhiz application shall
be ended and the " " symbol shall
be turned off.
Way of usage:
Touch key once to control your product
via a smart device. The " " symbol flashes
on the display. In the meantime, connection
with smart devices is searched. When the
connection is made, the symbol " " will
constantly light up.
Your connection should be active in
order for you to access the Home-
Whiz menu.
While the HomeWhiz is active, you
may control and monitor your hood
both from the hood display and
from your smart devices via Home-
Whiz.
Touch the " " key once to turn off
the HomeWhiz connection. The " "
symbol on the display turns off.
EN / 16
EN
DE
FR
NL