Product Features | Before First Use - Batavia Speed Saw TMK-014 Bedienungsanleitung

! Rechargeable Batteries do not belong in the household garbage. For battery dispo-
sal please check with your local council.
Operation
PRODUCT FEATURES
• The feature of this machine is the long runtime. The battery can be charged at any time, regardless
of the charging condition and without damaging the cells. There is no memory effect.
• The electronics protects the battery from over-charging, over-heating and total discharge.
• There is no loss of charge. The unit will work with full battery capacity from the first up to the last
screw. The battery is characterised by low self-discharge. A fully charged battery is always ready for
use, even if you do not use it for months.
BEFORE FIRST USE
Remove the speed saw and all accessories out of the packaging. Check all parts for damage in transit
and do not use damaged accessory or a damaged speed saw. Keep packaging materials out of reach of
children. There is risk of suffocation!
CHARGING THE BATTERY
Charge the battery before first use. In contrast to Ni-Cad or MH batteries Lithium-ion batteries do not have
a memory effect. The capacity of other batteries decreases steadily but the capacity of Lithium-ion batte-
ries does not decrease. The capacity remains constantly until the electronics interrupts discharging. Re-
gardless of the charging condition, the battery can be charged at any time without damaging the cells.
If desired you can order a second battery under the item-no. 7051576.
1. Connect the power cord of the quick charger with a wall socket. The red
power control lamp (|13) lights up.
2. Place the battery (|10) into the quick charger. The charger fits only in one
position into the charger.
3. The green charging control lamp (|13) starts flashing and indicates that
the battery is charged. After charging, the red LED turns off and the green
LED is lighting continuously. Please note that during charging process, bat-
tery and charger heat up slightly. The quick charger needs approx. 1 hour
to fully charge the empty battery. After charging process the green charging control lamp light up
continuously.
4. Remove the battery and unplug the power cord from the wall socket.
CHECKING BATTERY CAPACITY
By pressing the button (|A) on the battery you can detect the battery
capacity.
• If the red LED is on, the battery is discharged.
• If the red and the orange LEDs light up, the battery is half-empty.
• If all three LEDs light up, the battery is fully charged.
• If none of the LEDs light up, the battery is totally discharged and
has to be charged immediately.
|A
GB
| 13