Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3.
Press the button PUSH (12) in order to tilt the branch cutter mount about
90°. To align the branch cutter mount back to straight position, press the
button PUSH again. Move back the tiltable mount until it locks audibly.
4.
To switch on the branch cutter while connected with the base and supple-
mental extension sets, press the safety switch (2) to the left or to the right
and hold the safety switch pressed. Than press the ON/OFF switch (3).
5.
To switch off the branch cutter, release the ON/OF switch. The blade
automatically moves back to initial position.
Operating
17
Werbung
Inhaltsverzeichnis
