Fig.07
• Packing gland of the air valve: Remove the product regulator and extract the product needle
and spring fitted with its stop (see Fig.7 and 8). With a 9 mm. Allen wrench, remove the guide box,
extracting the valve spring and the valve (see Fig.9,10 and 11).
Fig.10
Them with a 6 mm. Allen wrench, remove the packing gland and extract the gasket (see Fig.13
and 14). Replace the packing gland and the washing support gasket (supplied in the specific kit)
and follow the reverse procedure.
Fig.08
Fig.11
Fig.13
ENGLISH
Fig.09
Fig.12
Fig.14