Blaupunkt AHE801 Bedienungsanleitung Seite 11

AHE801
NOTE: the device only works with 2.4GHz wireless networks. The network should use WPA2-PSK
encryption and AES protocol.
CONNECTING THE APPLICATION TO THE DEVICE VIA WIFI AND BLUETOOTH
After launching the application, press the 'add device' button. After about 15 seconds, the device
should be recognised. Press the button to continue adding. Select an available WiFi network and enter
the appropriate password. Press the button to continue. After a moment, you should see a message
that the device has been successfully added.
CONNECTING THE APPLICATION TO THE DEVICE VIA WIFI
Once the application has started, press the "add device" button. In the "Add manually" section, select
the product group "small appliances..." and then the product "oil heater". Then select the available WiFi
network and enter the corresponding password. The application should disconnect from the current
WiFi network, connect to the device and pass on the configuration parameters. The application should
return to the previous network. After a moment, a message should appear that the device has been
successfully added.
7