Swiss Pro+ SP-AF3.5LB Bedienungsanleitung Seite 3

Power-on state:
1. Turn on the power for the first time and enter the 3-digit panel.
2. After baking, display the default set temperature of "80" degrees Celsius
3. Turn the knob to enter the setting directly during standby.
Off state:
1. After the End of the baking time, the display screen displays "END". The buzzer beeps 3 times and
it is completed. The screen goes out after 10 seconds.
Manual mode:
1. Set the temperature by manually turning the knob clockwise to increase the temperature and
counter clockwise to decrease the temperature.
2. Press SET button to switch the timing mode, manually rotate the knob clockwise for longer time
and counter clockwise for shorter time.
3. After the operation is completed, it will start automatically for 3 seconds and the time will enter
the countdown mode.
4. Display "END" at the End of the timing, the fan delay 5 seconds, the buzzer beeps 3 times and is
completed, the whole machine stops working.
AUTO mode:
1. Press SET to switch menu mode and turn the knob to select the desired menu.
2. After the operation is completed, it will automatically start for 3 seconds and the time will enter
the countdown mode.
Electrical specification
Rated voltage
Rated power
Rated frequency
Warning
 Please read these instructions carefully before you first use and save them for future reference.
 Check whether the power supply voltage frequency of the place of use is within the rated voltage
frequency range of the appliance.
 Please remove the protective film and stickers on the air fryer before you first use.
 Make sure that the power switch is in the "OFF" position.
 Please untie the power cord tie before you first use air fryer and insert the plug into the socket.
Operation instruction
1. Please place the product on a flat, firm surface.
2. Do not place item on top of the product as this will block air flow.
3. The air fryer can cook a variety of food. For cooking different food, see the "Air Fryer Setup
Guide."
4. Plug the power cord into the power socket.
5. Place the grill plate in the air fryer pot. (Fig. 2)
6. Take out the pot gently. (Fig. 3)
220-240V
1400W
50-60Hz
2