LG PQCSB101S0 Bedienungsanleitung Seite 12

Operation Tips
Function Controller Connection
Individual indoor unit control
1. Press the individual On/Off button of the central controller and select the indoor unit to be controlled.
Now the applicable indoor unit will start or stop.
2. Function controller indicates the operating status of the selected indoor unit and makes it to change the
condition to adjust the wind/set temperature of the operating mode.
Group indoor unit control(1 group)
1. Press Total On/Total Off button of the Central controller. Then all the connected units will operate/stop.
2. Function controller indicates the operating statue of the first indoor unit of that group if no settings have been
made at functional controller.
3. However all indoors can also work under same running conditions as a group by making settings at the
functional controller.
All Groups (master & slave) Indoor Unit Control
1. Press Total On/Total Off button for more than 3 seconds. Then all indoor units conected to whole network will
start/stop.
2. Function control displays the operating status of the first indoor unit of master controller only. It also display
"Total on" on its screen. Now the settings can be done for all groups using function controller.
12 Simple Central Controller
PQCSC101S0
PQCSC101S0