Herunterladen Inhalt Inhalt Diese Seite drucken
LG V-net PDRYCB100 Installationsanleitung
Vorschau ausblenden Andere Handbücher für V-net PDRYCB100:

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 57
INSTALLATION MANUAL
• Please read this installation manual completely before installing the product.
• Installation work must be performed in accordance with the national wiring
standards by authorized personnel only.
• Please retain this installation manual for future reference after reading it
thoroughly.
TYPE : Simple Dry contact
MODEL : PDRYCB100
P/NO : MFL67708304
All manuals and user guides at all-guides.com
www.lg.com

Werbung

Inhaltsverzeichnis
loading

Inhaltszusammenfassung für LG V-net PDRYCB100

  • Seite 1 • Installation work must be performed in accordance with the national wiring standards by authorized personnel only. • Please retain this installation manual for future reference after reading it thoroughly. TYPE : Simple Dry contact MODEL : PDRYCB100 www.lg.com P/NO : MFL67708304...
  • Seite 2 All manuals and user guides at all-guides.com Dry Contact Unit Installation Manual TABLE OF CONTENTS Safety Precautions ..............3 Overview ................6 Part Description ..............8 Installation Method ..............9 Installation....................9 Installation Guide ..............11 Step1......................11 Step2......................12 Administrator Guide ............. 13 2 Dry Contact...
  • Seite 3: Safety Precautions

    All manuals and user guides at all-guides.com Safety Precautions Safety Precautions To prevent injury to the user or other people and property damage, the following instructions must be followed. n Incorrect operation due to ignoring instruction will cause harm or damage. The seriousness is classified by the following indications.
  • Seite 4 All manuals and user guides at all-guides.com Safety Precautions Do not install the product Do not install the unit in Do not put the product in the place where rain can humid locations. closer to fire. get to the product. •...
  • Seite 5 All manuals and user guides at all-guides.com Safety Precautions Do not spill water inside of If the product has been in- Children and elderly use the the product. undated, you must refer to a product under the service center or installation guardian’s supervision.
  • Seite 6 Overview Overview LG Dry Contact is a solution for automatic control of air conditioning system at the owner’s behest. In simple words, it’s a switch which can be used to turn the unit On/Off after getting the signal from external sources like key-in lock, door or window switch etc specially used in Hotel rooms.
  • Seite 7 All manuals and user guides at all-guides.com Overview Power Connector Indoor PCB Connector Dry Contact Controller Connector Installation Manual 7...
  • Seite 8: Part Description

    All manuals and user guides at all-guides.com Part Description Part Description PDRYCB100 (PCB + Case) Front Case Rear Case 3 4 5 6 ISO View Side Side * Others : Screw 4 EA(For installation) Clamp 4 EA(For installation) Cable(1 EA) Installation Manual (For Connecting with indoor unit) Cable 1 EA...
  • Seite 9: Installation Method

    All manuals and user guides at all-guides.com Installation Method Installation Method Installation 1) Loosen and remove two screws that secure the prod- uct. 2) Position the rear case to the direction towards to the connector for convenient cable arrangement. 3) Secure the rear case on the installation place using the supplied fixing screws.
  • Seite 10 All manuals and user guides at all-guides.com Installation Method 5) Connect the connection wires properly according to the connection method. (Refer to the instruction and set-up description) 6) Set the switch according to the setting method. (Refer to the instruction and set-up description) 7) Tighten the fixing screws on the top and bottom of the case.
  • Seite 11 Connect CN-CC with Indoor PCB by the cable(provided) - Connection of Dry contact only DRY CONTACT Indoor CN-CC CN-CC 24 V~ - Connection of Dry contact & LG Central Controller in case of single constant models. Connection PCB (6871A30056A) DRY CONTACT Indoor CN-CC CN-CC...
  • Seite 12 Error Check Display CN-CC RLY1 RLY2 Dry contact Controller CN_DRY INPUT 24 V~ LG does not supply this section - To apply power source directly to external source DRY CONTACT Operation Display Error Check Display CN-CC RLY1 RLY2 Dry contact...
  • Seite 13 All manuals and user guides at all-guides.com Administrator Guide Administrator Guide * Function It gives selection whether to turn ON the unit directly or not from the external source. The selection can be made by pressing CANCEL button of the wireless remote controller 3 times within 3 minutes of resetting the unit with facing it towards the unit.
  • Seite 14 All manuals and user guides at all-guides.com 14 Dry Contact...
  • Seite 15: Manuale D'installazione

    • Il lavoro d’installazione deve essere eseguito conformemente alla normativa vigente sugli impianti elettrici, solo da personale tecnico autorizzato. • Dopo averlo letto dettagliatamente, conservare questo manuale come riferimento per il futuro TIPO: Dry contact semplice MODELLO : PDRYCB100 www.lg.com...
  • Seite 16 All manuals and user guides at all-guides.com Manuale di Installazione Unità Dry Contact INDICE Precauzioni di sicurezza ............3 Panoramica ................6 Descrizione delle parti ............8 Metodo di installazione ............9 Installazione....................9 Manuale d’installazione ............11 Passaggio 1....................11 Passaggio 2....................12 Guida per l’amministratore ...........
  • Seite 17: Misure Di Sicurezza

    All manuals and user guides at all-guides.com Misure di sicurezza Misure di sicurezza Per prevenire lesioni all'utente o ad altre persone e danni alla proprietà, seguire le precauzioni seguenti. n L'errato utilizzo a causa della mancata lettura delle istruzioni può provocare lesioni o danni. La gravità...
  • Seite 18 All manuals and user guides at all-guides.com Misure di sicurezza Non installare il prodotto in Non Installare l’unità in locali Non installare il prodotto in una posizione in cui la pioggia umidi. vicinanza di una sorgente di possa cadere sul prodotto. fuoco.
  • Seite 19 All manuals and user guides at all-guides.com Misure di sicurezza Non versare l’acqua entro il Se il prodotto ha subito un I bambini e le persone prodotto. allagamento, chiamare il anziane devono usare il centro di servizio o il prodotto con la negozio di installazione.
  • Seite 20 All manuals and user guides at all-guides.com Panoramica Panoramica LG Dry Contact è una soluzione per il controllo automatico del sistema di condizionamento dell'aria su richiesta dell'utente. In altri termini, si tratta di un interruttore che può essere usato per accendere/spegnere l'unità dopo avere ottenuto il segnale da sorgenti esterne come blocco a chiave, interruttore di porte o finestre, ecc.
  • Seite 21 All manuals and user guides at all-guides.com Panoramica Connettore di alimentazione Connettore PCB interno Sistema di controllo Dry Contact Manuale d’installazione 7...
  • Seite 22: Descrizione Delle Parti

    All manuals and user guides at all-guides.com Descrizione delle parti Descrizione delle parti PDRYCB100 (PCB + Custodia) Custodia anteriore Custodia posteriore 3 4 5 6 Vista ISO Lato Lato * Altro: Vite 4 EA (Per l’installazione) Vite 4 EA (Per l’installazione) Cavo (1EA) Manuale d’installazione (Per connessione con l’unità...
  • Seite 23: Metodo Di Installazione

    All manuals and user guides at all-guides.com Metodo di installazione Metodo di installazione Installazione 1) Allentare e rimuovere le due viti che fissano il prodotto. 2) Posizionare il contenitore posteriore nella direzione verso il connettore per un’installazione corretta del cavo. 3) Fissare il contenitore posteriore in posizione di installazione usando le viti di fissaggio fornite.
  • Seite 24 All manuals and user guides at all-guides.com Installation Method 5) Collegare i cavi di collegamento correttamente secondo il metodo di collegamento. (Vedere le istruzioni e la descrizione di impostazione). 6) Impostare l’interruttore in base al metodo di regolazione. (Vedere le istruzioni e la descrizione di impostazione).
  • Seite 25 - Connessione del solo Dry Contact PCB DRY PCB Interna CONTACT CN-CC CN-CC 24 V~ - Connessione del Dry contact & del Controller Centrale LG in caso di modelli costanti singoli. Connessione PCB (6871A30056A) PCB DRY PCB Interna CONTACT CN-CC...
  • Seite 26 CN-CC RLY1 RLY2 Sistema di controllo Dry Contact CN_DRY INGRESSO 24 V~ LG non fornisce questo cavo - Per applicare l’alimentazione direttamente alla fonte esterna. PCB DRY CONTACT Display di funzionamento 
 Display di verifica degli errori CN-CC RLY1 RLY2...
  • Seite 27 All manuals and user guides at all-guides.com Guida Amministratore Guida Amministratore * Funzione Essa consente di scegliere se ACCENDERE o meno l’unità direttamente dalla fonte esterna. La selezione può essere realizzata premendo il pulsante ANNULLA del telecomando senza fili 3 volte entro 3 minuti o resettando l’unità puntando il telecomando verso l’unità.
  • Seite 28 All manuals and user guides at all-guides.com 14 Dry Contact...
  • Seite 29 • El trabajo de instalación debe realizarse de acuerdo con el Reglamento Eléctrico nacional y únicamente por personal autorizado. • Después de leer completamente este manual de instalación, guárdelo para futuras consultas. TIPO: Contacto seco simple MODELO : PDRYCB100 www.lg.com...
  • Seite 30 All manuals and user guides at all-guides.com Manual de instalación de unidad de contacto seco ÍNDICE Precauciones de seguridad ........... 3 Perspectiva general ............... 6 Descripción de las partes ............8 Método de instalación ............9 Instalación....................9 Guía de instalación ............... 11 Paso 1 ....................11 Paso 2....................12 Guía de administrador ............
  • Seite 31: Precauciones De Seguridad

    All manuals and user guides at all-guides.com Precauciones de seguridad Precauciones de seguridad Para evitar daños en el usuario u otras personas y daños materiales, deben seguirse las si- guientes instrucciones. n Un funcionamiento incorrecto causado por ignorar las instrucciones causará daños persona- les o materiales.
  • Seite 32: Durante El Uso

    All manuals and user guides at all-guides.com Precauciones de seguridad No instale el producto en un No instale la unidad en ubica- No coloque el producto cerca lugar donde la lluvia pueda ciones húmedas. del fuego. entrar dentro del mismo. •...
  • Seite 33 All manuals and user guides at all-guides.com Precauciones de seguridad No derrame agua dentro del Si el producto ha sido inun- Los niños y las personas ma- producto. dado, debe acudir a un cen- yores deben utilizar el pro- tro de servicio o una tienda ducto bajo la supervisión de de instalación.
  • Seite 34: Perspectiva General

    Perspectiva general Perspectiva general El Contacto Seco de LG es una solución para el control automático del sistema de aire acondicionado a instancia del usuario. Resumiendo, es un interruptor que puede usarse para encender o apagar la unidad tras recibir la señal de fuentes externas como un cerradura con llave, interruptor de puerta o ventana, etc...
  • Seite 35 All manuals and user guides at all-guides.com Perspectiva general Conector de alimentación eléctrica Conector de PCB interior Conector de controlador de contacto seco Manual de instalación 7...
  • Seite 36: Descripción De Las Partes

    All manuals and user guides at all-guides.com Descripción de las partes Descripción de las partes PDRYCB100 (PCB + Caja) Caja delantera Carcasa trasera 3 4 5 6 Vista ISO Lado Lado * Otros : Tornillo 4 unidad (para instala- ción) Abrazadera 4 unidad (para insta- Cable (1 unidad) Manual de instalación...
  • Seite 37: Método De Instalación

    All manuals and user guides at all-guides.com Método de instalación Método de instalación Instalación 1) Afloje y suelte los dos tornillos que sujetan el producto. 2) Sitúe la caja trasera orientada al conector para una co- rrecta colocación del cable. 3) Fije la caja trasera en el lugar de instalación con los tornillos suministrados.
  • Seite 38 All manuals and user guides at all-guides.com Installation Method 5) Conecte los cables de conexión adecuadamente, según el método de conexión. (Consulte las instrucciones y la descripción de configuración) 6) Ponga el interruptor según el método de ajuste. (Consulte las instrucciones y la descripción de configuración) 7) Apriete los tornillos de fijación en la parte superior e inferior de la caja.
  • Seite 39 - Sólo conexión de contacto seco PCB DE PCB interior CONTACTO SECO CN-CC CN-CC 24 V~ - Conexión del contacto seco y el controlador remoto LG para modelos constantes simples. PCB de conexión (6871A30056A) PCB DE PCB interior CONTACTO SECO...
  • Seite 40 CN-CC RLY1 RLY2 Controlador de contacto seco CN_DRY ENTRADA DE 24 V~ LG no proporciona esta sección - Para aplicar alimentación eléctrica directamente a una fuente externa PCB DE CONTACTO SECO Pantalla de funcionamiento Pantalla de comprobación de error CN-CC...
  • Seite 41 All manuals and user guides at all-guides.com Guía de administrador Guía de administrador * Función Permite seleccionar si se desea ENCENDER o no la unidad desde una fuente externa. La selección se puede hacer pulsando el botón CANCELACIÓN del mando a distancia 3 veces dentro de un periodo de 3 minutos de reseteo de la unidad con el mando orientado hacia la unidad.
  • Seite 42 All manuals and user guides at all-guides.com 14 Contacto seco...
  • Seite 43 • Veuillez lire ce manuel d’instructions avant installer le produit. • Conformément aux standards nationaux sur le câblage, l’installation ne doit être effectuée que par du personnel autorisé. • Après l’avoir lu, veuillez conserver ce manuel d’installation pour référence ultérieure. TYPE : Contact sec simple MODÈLE : PDRYCB100 www.lg.com...
  • Seite 44 All manuals and user guides at all-guides.com Manuel d'installation du module de contact sec TABLE DES MATIÈRES Consignes de sécurité ............3 Présentation ................6 Description des composants ..........8 Méthode d’installation ............9 Installation....................9 Guide d’installation ............... 11 Étape 1....................11 Étape 2....................12 Guide de l’administrateur .............
  • Seite 45: Consignes De Sécurité

    All manuals and user guides at all-guides.com Consignes de sécurité Consignes de sécurité Respectez les instructions suivantes pour éviter de vous blesser, de blesser des tiers ou d'en- dommager le matériel. n Le non-respect des instructions peut entraîner un fonctionnement incorrect et provoquer des bles- sures ou ou une détérioration.
  • Seite 46: Au Cours De L'utilisation

    All manuals and user guides at all-guides.com Consignes de sécurité N'installez pas le produit à N'installez pas le produit Ne placez pas le produit à un endroit exposé à la pluie. dans un endroit humide. proximité d'un feu. • Cela pourrait entraîner une dé- •...
  • Seite 47 All manuals and user guides at all-guides.com Consignes de sécurité Ne renversez pas d'eau à l'in- En cas d'immersion du pro- Ne laissez pas les enfants et térieur du produit. duit dans l'eau, adressez-vous les personnes âgées utiliser systématiquement au service le produit sans la présence après-vente ou au prestataire d'une tierce personne.
  • Seite 48: Présentation

    Présentation Présentation Le contact sec LG est une solution de contrôle automatique des systèmes de climatisation au gré du propriétaire. En termes simples, il s'agit d'un commutateur qui permet d'allumer/éteindre l'unité à partir d'un signal de source ex- terne comme une serrure à clé ou un commutateur de porte ou de fenêtre, spécialement utilisé dans des cham- bres d'hôtel.
  • Seite 49 All manuals and user guides at all-guides.com Présentation Connecteur d'alimentation Connecteur de la carte à circuit imprimé de l'unité intérieure Connecteur du contrôleur du contact sec Manuel d'installation 7...
  • Seite 50: Description Des Composants

    All manuals and user guides at all-guides.com Description des composants Description des composants PDRYCB100 (carte à circuit imprimé + boîtier) Face avant Face arrière 3 4 5 6 Vue ISO Carte à circuit imprimé Côté Côté * Autres : Vis x4 (pour l'installation) Collier x4 (pour l'installation) Câble x1 Manuel d'installation...
  • Seite 51: Méthode D'installation

    All manuals and user guides at all-guides.com Méthode d’installation Méthode d’installation Installation 1) Dévissez et enlevez les deux vis qui maintiennent le boîtier. 2) Positionnez le boîtier arrière dans la direction du connecteur pour faciliter la mise en place du câble. 3) Vissez le boîtier arrière sur la surface d'installation à...
  • Seite 52 All manuals and user guides at all-guides.com Méthode d’installation 5) Reliez les fils de raccordement conformément aux instructions. (Reportez-vous à la section relative au réglage et à l'utilisation.) 6) Réglez le commutateur conformément à la méthode spécifiée. (Reportez-vous à la section relative au réglage et à...
  • Seite 53 IMPRIMÉ DU CONTACT SEC intérieure CN-CC CN-CC 24 V~ - Raccordement du contact sec et du contrôleur central LG en cas de modèles à con- stante unique. Carte à circuit imprimé de connexion (6871A30056A) Carte à circuit CARTE À CIRCUIT imprimé...
  • Seite 54 CN-CC RLY1 RLY2 Contrôleur du contact sec CN_DRY INPUT 24 V~ LG ne fournit pas cette partie. - Application de la source d'alimentation directement à la source externe CARTE À CIRCUIT IMPRIMÉ DU CONTACT SEC Indicateur de fonctionnement Indicateur d'erreur...
  • Seite 55 All manuals and user guides at all-guides.com Guide de l’administrateur Guide de l’administrateur * Fonction Vous avez le choix entre allumer l'unité directement ou pas à partir de la source externe. Ce choix peut être effectué en appuyant sur la touche CANCEL de la télécommande sans fil trois fois dans les trois minutes suivant la réinitialisation de l'unité...
  • Seite 56 All manuals and user guides at all-guides.com 14 Contact sec...
  • Seite 57: Typ: Einfacher Potentialfreier Kontakt

    • Die Montage darf nur durch qualifiziertes Personal und muss gemäß den nationalen Bestimmungen für elektrische Anschlüsse erfolgen. • Bewahren Sie dieses Benutzerhandbuch nach dem Lesen zum späteren Gebrauch an einem sicheren Ort auf. TYP: Einfacher potentialfreier Kontakt MODELL: PDRYCB100 www.lg.com...
  • Seite 58 All manuals and user guides at all-guides.com Gerät mit potentialfreiem Kontakt - Montageanleitung INHALTSVERZEICHNIS Sicherheitshinweise ............... 3 Überblick ................6 Beschreibung der Bauteile ............. 8 Montage ................. 9 Montage....................9 Montageanleitung ..............11 Schritt 1 ....................11 Schritt 2....................12 Anleitung für den Bediener ..........13 2 Potentialfreier Kontakt...
  • Seite 59: Sicherheitshinweise

    All manuals and user guides at all-guides.com Sicherheitshinweise Sicherheitshinweise Um Verletzungen des Bedieners oder anderer Personen sowie Sachschäden zu vermeiden, müssen die folgenden Anleitungen befolgt werden. n Ein unsachgemäßer Betrieb unter Missachtung der Anleitungen kann zu Verletzungen oder Beschädigungen führen. Die Schweregrade werden durch folgende Symbole gekennzeichnet. ACHTUNG Dieses Symbol bedeutet Lebensgefahr oder Gefahr von schweren Verletzungen.
  • Seite 60: Empfohlene Produkte

    All manuals and user guides at all-guides.com Sicherheitshinweise Das Gerät nicht an einem Ort Das Gerät nicht an Orten mit Das Gerät nicht in der Nähe montieren, an dem Regenwasser hoher Luftfeuchtigkeit mon- von offenem Feuer montie- in das Gerät eindringen könnte. tieren.
  • Seite 61 All manuals and user guides at all-guides.com Sicherheitshinweise Es darf kein Wasser in das Sollte das Gerät in Wasser ge- Kinder und ältere Personen Gerät eindringen. taucht worden sein, wenden Sie sollten das Gerät nur unter sich an einen Kundendienst oder Aufsicht bedienen.
  • Seite 62: Überblick

    All manuals and user guides at all-guides.com Überblick Überblick LG Potentialfreier Kontakt ist eine Lösung zur automatischen Steuerung von Klimagerätesystemen durch den Be- diener. Mit anderen Worten ein Schalter zum Ein- und Ausschalten von Geräten nach Empfang eines externen Signals, wie z.
  • Seite 63 All manuals and user guides at all-guides.com Überblick Netzanschluss Leiterplatinen- anschluss Innengerät Steuerungsanschluss potentialfreier Kontakt Montageanleitung 7...
  • Seite 64: Beschreibung Der Bauteile

    All manuals and user guides at all-guides.com Beschreibung der Bauteile Beschreibung der Bauteile PDRYCB100 (Leiterplatine + Gehäuse) Vorderes Gehäuseteil Rückseite des Gehäuses 3 4 5 6 ISO-Ansicht Leiterplatine Seite Seite * Andere: Schrauben 4 Stk. (Zur Montage) Klemmen, 4 Stk. (zur Montage) Kabel (1 Stk.) Montageanleitung (Für den Anschluss am Innengerät)
  • Seite 65 All manuals and user guides at all-guides.com Montage Montage Montage 1) Lösen und entfernen Sie die beiden Schrauben, mit denen das Gerät gesichert wird. 2) Bewegen Sie die Gehäuserückseite in Richtung An- schluss, um die Kabelanordnung gut erreichen zu kön- nen.
  • Seite 66 All manuals and user guides at all-guides.com Montage 5) Schließen Sie die Anschlusskabel gemäß den Anleitungen an. (siehe Bedienungs- und Montagean- leitung) 6) Schieben Sie den Schalter in die gewünschte Stellung. (siehe Bedienungs- und Montageanleitung) 7) Ziehen Sie die Montageschrauben am oberen und unteren Gehäuse fest. VORSICHT 1.
  • Seite 67 Verbinden Sie Anschluss CN-CC über das (mitgelieferte) Kabel mit der Leiterplatine des In- nengerätes - Nur Anschluss des potentialfreien Kontaktes Leiterplatine LEITERPLATINE POTENTIALFREIER KONTAKT Innengerätes CN-CC CN-CC 24 V~ - Anschluss des potentialfreien Kontaktes an einer LG Zentralsteuerung bei Einzelmod- ellen. Leiterplatinenanschluss (6871A30056A) Leiterplatine LEITERPLATINE POTENTIALFREIER KONTAKT Innengerätes CN-CC CN-CC 24 V~ PI485-Leiterplatine: Muss für...
  • Seite 68 POTENTIALFREIER KONTAKT Betriebsanzeige Fehleranzeige CN-CC RLY1 RLY2 Steuerung pot- entialfreier Kontakt CN_DRY INPUT 24 V~ LG stellt diesen Teil nicht bereit - Stromversorgung direkt über das externe Gerät LEITERPLATINE POTENTIALFREIER KONTAKT Betriebsanzeige Fehleranzeige CN-CC RLY1 RLY2 Steuerung pot- entialfreier Kontakt...
  • Seite 69: Anleitung Für Den Bediener

    All manuals and user guides at all-guides.com Anleitung für den Bediener Anleitung für den Bediener * Funktion Sie können festlegen, ob das Gerät direkt über das externe Gerät EINGESCHALTET werden kann. Richten Sie dazu die Fernbedienung auf das Gerät und drücken Sie inner- halb der ersten drei Minuten nach dem Einschalten des Gerätes dreimal die Taste AB- BRECHEN auf der kabellosen Fernbedienung.
  • Seite 70 All manuals and user guides at all-guides.com 14 Potentialfreier Kontakt...
  • Seite 71: Manual De Instalação

    • O trabalho de instalação deverá ser executado em conformidade com os padrões de ligação nacionais apenas por pessoal autorizado. • Depois de ler este manual de instalação na totalidade, por favor, guarde-o para consultas futuras. Tipo: Contacto Seco Simples MODELO : PDRYCB100 www.lg.com...
  • Seite 72 All manuals and user guides at all-guides.com Manual de Instalação da Unidade de Contacto Seco ÍNDICE Precauções de segurança ............. 3 Visão geral ................6 Descrição das peças .............. 8 Método de Instalação ............. 9 Instalação....................9 Instalação Guide ..............11 Passo1 ....................11 Passo2....................12 Guia do Administrador ............
  • Seite 73: Precauções De Segurança

    All manuals and user guides at all-guides.com Precauções de segurança Precauções de segurança Para prevenir ferimentos no utilizador ou noutras pessoas e danos de propriedade, deverá se- guir as seguintes instruções. n O funcionamento incorrecto provocado pelo desrespeito das instruções poderá provocar feri- mentos ou danos.
  • Seite 74 All manuals and user guides at all-guides.com Precauções de segurança Não instale o produto num Não instale a unidade em lo- Não coloque o produto mais lugar onde a chuva possa che- cais húmidos. perto do fogo. gar ao produto. •...
  • Seite 75 All manuals and user guides at all-guides.com Precauções de segurança Não derrame água na parte Se o produto foi inundado, Crianças e idosos só devem interior do produto. deve referir uma loja de ins- utilizar o produto sob super- talação ou um centro de ser- visão de um responsável.
  • Seite 76: Visão Geral

    Visão geral Visão geral O Contacto Seco da LG é uma solução para controlo automático do sistema de ar condicionado, consoante a preferência do proprietário. Em palavras simples, é um interruptor que pode ser utilizado para Ligar/Desligar a unidade, depois de receber o sinal de fontes externas, tais como bloqueio de teclas, interruptor de porta ou janela, etc., especialmente em quar-...
  • Seite 77 All manuals and user guides at all-guides.com Visão geral Conector de alimentação Conector da PCI de interior Conector do Controlador do Contacto Seco Manual de instalação 7...
  • Seite 78: Descrição Das Peças

    All manuals and user guides at all-guides.com Descrição das peças Descrição das peças PDRYCB100 (PCI + Caixa) Caixa Anterior Caixa Posterior 3 4 5 6 Vista ISO Parte lateral Parte lateral * Outros: Parafuso 4 UNI (Para instalação) Parafuso 4 UNI (Para instalação) Cabo (1 UNI) Manual de instalação (Para ligação com a unidade interior)
  • Seite 79: Método De Instalação

    All manuals and user guides at all-guides.com Método de Instalação Método de instalação Instalação 1) Solte e retire os dois parafusos que fixam o produto. 2) Posicione a parte de trás da caixa da direcção da liga- ção para colocar o cabo de forma conveniente. 3) Afixe a parte de trás da caixa no local de instalação usando os parafusos de fixação.
  • Seite 80 All manuals and user guides at all-guides.com Método de Instalação 5) Ligue os fios de ligação correctamente de acordo com o método de ligação. (Consulte a descrição de instalação e instruções) 6) Ponha o interruptor com o método de configuração. (Consulte a descrição de instalação e instru- ções) 7) Aperte os parafusos fixadores nas partes superior e inferior da caixa.
  • Seite 81 PCI DO PCI da unidade CONTACTO SECO Interior CN-CC CN-CC 24 V~ - Ligação do Contacto Seco e Controlador Central LG no caso de modelos de con- stantes individuais. Ligação PCI (6871A30056A) PCI DO PCI da unidade CONTACTO SECO Interior...
  • Seite 82 RLY1 RLY2 Controlador do Contacto Seco CN_DRY INPUT 24 V~ A LG não fornece esta secção - Para aplicar a fonte de alimentação diretamente à fonte externa PCI DO CONTACTO SECO Ecrã de Operação Ecrã de Verificação de Erro CN-CC...
  • Seite 83 All manuals and user guides at all-guides.com Guia do Administrador Guia do Administrador * Função Pode selecionar se é necessário ligar o aparelho diretamente ou não a partir da fonte ex- terna. A seleção pode ser feita ao pressionar o botão CANCEL do controlador remoto wireless 3 vezes dentro dos 3 minutos de redefinição da unidade, ao posicioná-lo em frente em direção à...
  • Seite 84 All manuals and user guides at all-guides.com 14 Contacto Seco...
  • Seite 85: Руководство По Монтажу

    • Работы по установке должны выполняться в соответствии с государственными стандартами по прокладке электропроводки и только персоналом, имеющим соответствующее разрешение. • После внимательного прочтения данного руководства по монтажу сохраните его для дальнейшего использования в справочных целях. ТИП: простой сухой контакт МОДЕЛЬ : PDRYCB100 www.lg.com...
  • Seite 86 All manuals and user guides at all-guides.com Руководство по монтажу блока с сухими контактами СОДЕРЖАНИЕ Меры предосторожности ............ 3 Обзор ..................6 Описание деталей ............... 8 Метод монтажа ..............9 Монтаж ....................9 Руководство по установке ..........11 Шаг 1 .....................11 Шаг...
  • Seite 87: Меры Предосторожности

    All manuals and user guides at all-guides.com Меры предосторожности Меры предосторожности Во избежание травмирования пользователя и других лиц, а также предотвращения при- чинения материального ущерба необходимо следовать инструкциям, приведенным ниже. n Несоблюдение данных указаний приведет к материальному ущербу или поломке. Серьезность...
  • Seite 88: Эксплуатация

    All manuals and user guides at all-guides.com Меры предосторожности Не устанавливайте изделие в Не устанавливайте изде- Не располагайте изделие месте, где оно может подвер- лие во влажных местах. близко к источникам огня. гаться воздействию дождя. • Приводит к повреждению • Приводит к повреждению из- •...
  • Seite 89 All manuals and user guides at all-guides.com Меры предосторожности Не допускайте попадания Если изделие будет за- Дети и пожилые люди воды внутрь изделия. лито водой, обратитесь в должны использовать из- сервисный или установоч- делие под присмотром ро- ный центр. дителей или опекунов. •...
  • Seite 90 All manuals and user guides at all-guides.com Обзор Обзор Сухой контакт LG является решением для автоматического управления системой кондиционирования в соответствии с желанием владельца. Проще говоря, он представляет собой переключатель, используемый для включения и выключения устройства при получении сигнала от внешнего источника, такого как карточка-ключ, переключатель в...
  • Seite 91 All manuals and user guides at all-guides.com Обзор Разъем электропитания Разъем внутреннего PCB-блока Разъем контроллера сухого контакта Руководство по монтажу 7...
  • Seite 92: Описание Деталей

    All manuals and user guides at all-guides.com Описание деталей Описание деталей PDRYCB100 (PCB-блок + корпус) Лицевая часть корпуса Тыльная часть корпуса 3 4 5 6 Изометрический вид Блок PCB Вид сбоку Вид сбоку * Прочее: Винт 4 EA (для монтажа) Крепежный...
  • Seite 93 All manuals and user guides at all-guides.com Метод монтажа Метод монтажа Монтаж 1) Ослабьте и удалите два винта, скрепляющие изде- лие. 2) Расположите тыльную часть корпуса в направле- нии разъема для удобного размещения кабеля. 3) Закрепите тыльную часть корпуса на месте уста- новки...
  • Seite 94 All manuals and user guides at all-guides.com Метод монтажа 5) Подключите нужным образом провода в соответствии с методом подключения. (См. инструкции и описание установки) 6) Установите переключатель в соответствии с методом настройки. (См. инструкции и описание установки) 7) Зафиксируйте крепежными винтами на верхней и нижней частях корпуса. ВНИМАНИЕ! 1.
  • Seite 95: Руководство По Установке

    (входит в комплект поставки) - Подключается только сухой контакт СУХОЙ КОНТАКТ Внутренний PCB-БЛОКА PCB-блок CN-CC CN-CC 24 V~ - Подключение сухого контакта и центрального контроллера LG для случая от- дельных постоянных моделей. Соединительный PCB-блок (6871A30056A) СУХОЙ КОНТАКТ Внутренний PCB-БЛОКА PCB-блок CN-CC...
  • Seite 96 Рабочий дисплей Дисплей проверки ошибок CN-CC RLY1 RLY2 Контроллер сухого контакта CN_DRY INPUT 24 V~ LG не поставляет элементы этого раздела - Чтобы подключить источник питания напрямую к внешнему источнику СУХОЙ КОНТАКТ PCB-БЛОКА Рабочий дисплей Дисплей проверки ошибок CN-CC RLY1 RLY2 Контроллер...
  • Seite 97 All manuals and user guides at all-guides.com Руководство администратора Руководство администратора * Функция Позволяет выбирать, следует ли включать изделие напрямую с внешнего источ- ника. Выбор может быть сделан после троекратного нажатия кнопки ОТМЕНА на беспроводном пульте дистанционного управления в течение 3 минут, чтобы сбро- сить...
  • Seite 98 All manuals and user guides at all-guides.com 14 Сухой контакт...
  • Seite 99 All manuals and user guides at all-guides.com ‫ط‬ ‫ي‬ ‫س‬ ‫ب ل ا‬ ‫ف‬ ‫ا‬ ‫ج‬ ‫ل ا‬ ‫ل‬ ‫ا‬ ‫ص‬ ‫ت ال‬ : ‫ا‬ ‫ع‬ ‫و‬ ‫ن ل ا‬ ‫: ز‬ ‫ا ر‬ ‫ط‬ ‫ل ا‬ www.lg.com...
  • Seite 100 All manuals and user guides at all-guides.com ‫ت‬ ‫ا ي‬ ‫و ت‬ ‫ح‬ ‫م‬ ‫ل ا‬ ‫ل‬ ‫و‬ ‫د‬ ‫ج‬ ٢...
  • Seite 101 All manuals and user guides at all-guides.com ‫ة‬ ‫م‬ ‫ال‬ ‫س‬ ‫ل ا‬ ‫ت‬ ‫ا‬ ‫ط‬ ‫ا‬ ‫ي ت‬ ‫ح‬ ‫ا‬ ‫ل‬ ‫ع‬ ‫ف ت‬ ‫ن‬ ‫ل‬ ‫ك‬ ‫ن أ‬ ‫د‬ ‫ك‬ ‫أ ت‬ ‫ت‬ ‫ا‬ ‫م ي‬ ‫ل ع‬ ‫ت...
  • Seite 102 All manuals and user guides at all-guides.com ‫. ر ا‬ ‫ن ل ا‬ ‫ن‬ ‫م‬ ‫ب‬ ‫ر ق‬ ‫ل ا ب‬ ‫ج‬ ‫ت ن‬ ‫م ل‬ ‫ا ع‬ ‫ض‬ ‫ت‬ ‫ال‬ ‫ن‬ ‫ك‬ ‫ا م‬ ‫أل ا‬ ‫ي‬ ‫ف‬ ‫ة د‬ ‫ح‬...
  • Seite 103 All manuals and user guides at all-guides.com ‫ل‬ ‫ا ف‬ ‫ط‬ ‫أل ا‬ ‫م د‬ ‫خ ت‬ ‫س‬ ‫ي‬ ‫ن أ‬ ‫ب‬ ‫ج ي‬ ‫ب‬ ‫ج ي‬ ‫، ء‬ ‫ا م‬ ‫ل ا ب‬ ‫ج‬ ‫ت ن‬ ‫م ل ا‬ ‫ر...
  • Seite 104 All manuals and user guides at all-guides.com ‫م‬ ‫ا ع‬ ‫ض‬ ‫ر‬ ‫ع‬ ٦...
  • Seite 105 All manuals and user guides at all-guides.com ٧...
  • Seite 106 All manuals and user guides at all-guides.com ‫ء‬ ‫ا ز‬ ‫ج‬ ‫أل ا‬ ‫ف‬ ‫ص‬ ‫و‬ ‫ي‬ ‫ج‬ ‫ر‬ ‫ا خ‬ ‫ل ا‬ ‫ف‬ ‫ال‬ ‫غ‬ ‫ل ا‬ ‫ة‬ ‫ع‬ ‫و ب‬ ‫ط‬ ‫م ل‬ ‫ا ة‬ ‫ر ئ‬ ‫ا د‬ ‫ل...
  • Seite 107 All manuals and user guides at all-guides.com ‫ب‬ ‫ي ك‬ ‫ر‬ ‫ت ل ا‬ ‫ة‬ ‫ق‬ ‫ي ر‬ ‫ط‬ ‫ب‬ ‫ي‬ ‫ك ر‬ ‫ت ل ا‬ ٩...
  • Seite 108 All manuals and user guides at all-guides.com ١ ٠...
  • Seite 109 All manuals and user guides at all-guides.com ‫ب‬ ‫ي ك‬ ‫ر‬ ‫ت ل ا‬ ‫ل‬ ‫ي‬ ‫ل د‬ ‫ة و‬ ‫ط‬ ‫خ‬ ‫ل ا‬ CN-CC CN-CC CN-CC CN-CC ١ ١...
  • Seite 110 All manuals and user guides at all-guides.com ‫ة و‬ ‫ط‬ ‫خ‬ ‫ل ا‬ CN-CC RLY1 RLY2 CN_DRY CN-CC RLY1 RLY2 CN_DRY ١ ٢...
  • Seite 111 All manuals and user guides at all-guides.com ‫ل‬ ‫و‬ ‫ؤ‬ ‫س‬ ‫م‬ ‫ل ا‬ ‫ل‬ ‫ي‬ ‫ل د‬ ‫ة‬ ‫ف ي‬ ‫ظ‬ ‫و‬ ‫ل ا‬ CANCEL AUTO CLEAN ‫ً ة ر‬ ‫ي‬ ‫ج‬ ‫ر ا‬ ‫خ‬ ‫ل ا‬ ‫ر د‬ ‫ص‬...
  • Seite 112 All manuals and user guides at all-guides.com ١ ٤...

Diese Anleitung auch für:

V-net pdrycb100

Inhaltsverzeichnis