Viatom Wellue BP2 Bedienungsanleitung Seite 7

To measure blood pressure, the arm must be squeezed

by the cuff hard enough to temporarily stop blood flow
through the artery. This may cause pain, numbness, or
a temporary red mark on the arm. This condition will
appear especially when measurements are repeatedly
taken. Any pain, numbness, or red marks will disappear
with time.
Do not apply the cuff on an arm with another

electronic medical device. The equipment may not
function properly.
People who have a severe circulatory deficiency in their

arm must consult a doctor before using the device, to
avoid medical problems.
Do not self-diagnose the measurement results and

start treatment on your own. Always consult your
doctor to evaluate the results and subsequent
treatment.
Do not apply the cuff on an arm with an unhealed

wound.
Do not apply the cuff on an arm receiving an

intravenous drip or blood transfusion. It may cause
injury or accidents.
Do not use the device where flammable gases, such as

anesthetic gases are present. It may cause an
explosion.
Do not use the device in highly concentrated oxygen

environments, such as a high-pressure oxygen chamber
or an oxygen tent. It may cause a fire or explosion.
5