Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3. Using the Monitor
3.1 Charging the Battery
Use the USB cable to charge the monitor. Connect the USB
cable to a USB charger or to the PC. It takes 2 hours to fully
charge. When the battery is fully charged, the indicator will
be off.
The monitor works on very low power consumption, and a
full charge usually lasts for months. A battery symbol, which
indicates the battery status is displayed on the screen.
Note: The device cannot be used while charging.
3.2 Blood Pressure Measurement
3.2.1 Before Taking Measurements
To help ensure accurate measurements, follow these
directions:
Rest for at least 5 minutes before taking
measurements.
Stress raises blood pressure. Avoid taking
measurements when stressed.
Remove any tight-fitting clothing from your arm.
A single measurement does not provide an accurate
indication of your true blood pressure. You need to
take and record several results over a period of time.
Try to measure your blood pressure at the same time
each day to maintain consistency.
3.2.2 Applying the Arm Cuff
1.
Wrap the cuff around the upper arm, about 1 to 2 cm
above the elbow joint, as shown.
2.
Place the cuff directly against the skin, as clothing may
10
Werbung
