Viatom Wellue BP2 Bedienungsanleitung Seite 18

Error 1
Apply the arm
cuff tighter.
Error 2
Do not move
or talk, remain
still.
Error 3
Remove any
clothing
interfering
with the cuff.
Error x (x>4)
Contact
customer
service.
Check the
connection
ECG waveform
drifts
The ECG
waveform
amplitude is
small
Arm cuff is applied too
loosely
Moving or talking while
taking measurements,
and the pressure of the
cuff is interfered with.
The signal is poor while
measuring blood
pressure.
The device has
malfunctioned.
The ECG cable is off, or
the body parts are not
placed on the
electrodes closely
enough.
The pressure exerted
on the electrode is not
stable or too much.
Hand or body may be
moving.
The measurement
method you chose is
not suitable for you.
16
Tighten the
arm cuff and
try again.
Remain still
and do not
talk while
taking
measuremen
ts
Take blood
pressure on a
bare arm.
Contact
customer
service.
Check the
ECG cable, or
place the
electrodes
closer to your
body part.
Hold the
device stably
and gently.
Try to keep
perfectly still
and test
again.
Change
another lead
and try again.