Viatom Wellue BP2 Bedienungsanleitung Seite 14

4. The readings will be displayed when the measurement is
finished.
You can press Start/Stop button again to stop the blood
pressure measurement.
Note: While taking measurements, you should remain
still and not squeeze the cuff
3.2.5 After Taking Measurements
The monitor will automatically release the gas in the cuff
once finished taking measurements.
Press the button to turn the power off after taking
measurements. Remove the cuff.
Note: The device has an automatic power shut-off function,
which turns off the power automatically 2 minutes after
taking measurements.
3.3 Recording ECG
3.3.1 Before Taking Measurements
To help ensure accurate measurements, follow these
directions:
Before using the ECG function, pay attention to the

following points to obtain precise measurements.
The ECG electrode must be positioned directly against

the skin.
If your skin or hands are dry, moisten them using a

damp cloth before taking measurements.
If the ECG electrodes are dirty, remove the dirt using a

soft cloth or cotton swap dampened with disinfection
alcohol.
While taking measurements, do not touch your body

with the hand with which you are taking
.
12