Blaupunkt New York 835 W Bedienungsanleitung Seite 29

The options menu is displayed, the current setting is
shown after RDS.
u In the options menu, press the RDS button to change
the setting.
u Press the [
] button.
The radio menu is displayed again.
Switching RDS time signal on/off
The time can be synchronised with the time data trans-
mitted via RDS.
u In the radio menu, press the [
u In the options menu, press the RDS Clock Time but-
ton to change the setting.
u Press the [
] button.
The radio menu is displayed again.
Optimising radio reception
The HICUT function causes a reception improvement in
case of poor radio reception (in FM radio mode only). If
reception interferences exist, the interference level is au-
tomatically decreased.
u In the radio menu, press the [
u In the options menu, press the HICUT button to
change the setting.
u Press the [
] button.
The radio menu is displayed again.
Switching the REG function (regional
programmes) on/off
Some RDS stations divide their programmes into region-
al programmes with diff erent contents at certain times.
If the REG function is activated, the car sound system
changes only to those alternate frequencies of the set
station on which the same regional programme is being
broadcast.
u In the radio menu, press the REG button to switch
the REG function on or off .
The REG button is illuminated if the REG function is
switched on.
Switching the AF (alternative frequencies)
function on/off
If the AF function is activated, the car sound system auto-
matically tunes into the best receivable frequency for the
station that is currently set.
u In the radio menu, press the AF button to switch the
Adjusting the seek tuning sensitivity
The seek tuning sensitivity decides whether the auto-
matic station seek tuning fi nds only strong stations or
also weaker stations that may be noisy.
u In the radio menu, press the Loc button to set the
Traffi c information
In the reception region Europe, an FM station can iden-
] button.
tify traffi c announcements via an RDS signal. If priority for
traffi c reports is switched on, a traffi c report is automati-
cally switched through, even if the car sound system is
currently not in radio mode.
Switching priority for traffi c announcements on/off
u In the radio menu, press the TA button to switch the
] button.
Setting the minimum volume for traffi c
announcements
u In the radio menu, press the [
u In the options menu, press the TA VOL button.
u Adjust the desired volume with the [ ] or [ ] but-
u Press the [
AF function on or off .
The AF button is illuminated if the AF function is
switched on.
sensitivity of the station seek tuning.
If the Loc button is illuminated, the seek tuning lo-
cates only strong stations.
Note:
The volume is increased for the duration of the
switched-through traffi c announcement. You can ad-
just the minimum volume for traffi c announcements.
priority for traffi c announcements on or off .
The TA button is illuminated if the priority for traffi c
announcements is switched on.
ton.
] button.
The radio menu is displayed again, the set volume
is stored.
Radio mode
] button.
29