Werbung
Verfügbare Sprachen
Verfügbare Sprachen
• Remove the hinge cover and disassemble the
upper door hinge.
• Lift the freezer door; move the door-stopper at the
door underside. Set the door safely aside.
• Disassemble the middle door hinge. Lift the fridge
door; move the door-stopper at the door under-
side. Set the door safely aside.
• Tilt the unit slightly backwards and block it in this
position. Unscrew the feet and disassemble the
lower door hinge.
• Transfer and attach the lower door hinge to the
opposite unit side. Screw in the feet accordingly.
• Put the unit back in the upright position. Place the
blind plugs on the exposed holes of the middle
door hinge.
• Put on the fridge door and fix it in the intended
position. Rotate the middle door hinge about
180°, transfer and attach it to the opposite unit
side.
• Remove the blind cap on the unit top and insert
the delivered blind cap* * * * on the opposite unit side.
• Put on the freezer door and fix it in the intended
position. Transfer and attach the upper door hinge
to the opposite unit side after unscrewing the
hinge pin and inserting it from the other hinge
side. Attach the delivered hinge cover* * * * .
Check that the doors are aligned vertically and hori-
zontally to ensure proper opening and closing of the
doors.
Startup / Operation
Startup / Operation
Startup / Operation
Startup / Operation
Prior to first use
Prior to first use
Prior to first use
Prior to first use
CAUTION: : : :
CAUTION
CAUTION
CAUTION
After transport, the appliance should be left standing
upright for about four hours before connecting to the
power supply. Nonobservance could lead to malfunc-
tion of the cooling system and causes an appliance
breakdown.
Clean the appliance interior including all accessory
parts. Consider the instructions which we provide in
the chapter "Cleaning and Maintenance".
Starting the appliance
Starting the appliance
Starting the appliance
Starting the appliance
• Connect the appliance to the power supply.
• Operate the temperature control. See also the
section "Settings".
Settings
Settings
Settings
Settings
Setting [ 0 ] means that the appliance is in the off
state. Turn the temperature control clockwise, start-
ing from this setting; the appliance will turn on auto-
matically.
The power levels [ 1 – 7 ] regulate the different val-
ues of the internal temperature.
20
Werbung
