auna 10008633 Bedienungsanleitung Seite 15

4) Press the PLAY/PAUSE button to play the stored tracks, press UP/F.F or DN/F.B to select a track
in the sequence saved.
5) Press the STOP button twice to leave program mode. The entire program stored in memory is
track sequence cancelled.
NOTE: You can store a total of 99 MP3 tracks and 20 CD tracks.
USB RECORDING
1) CD RECORDING
Plug U DISK into USB socket. Then press CD/USB button place CD into the CD drawer, play the
track which will be recorded. Press RECORD button twice to start recording, UKW .ST/REC LED
and USB icon will flash. The song number and folder flash.
2) MP3 DISC RECORDING
Plug U DISK into USB socket. Then press CD/USB button, place MP3 disk into the CD drawer, the
recording procedure is the same as that of CD mentioned above.
3) CASSETTE RECORDING
Plug U DISK into USB socket. Then press the TAPE button, place the cassette into cassette slot,
play the cassette which will be recorded. Press RECORD button twice to start recording, USB and
REC will flash on the screen. Press STOP button to stop recording when you finished recording.
4) PHONOGARPH RECORDING
Plug U DISK into USB socket. Then press the PHONO button, play the Phono which will be recorded,
set the tone arm to the right place. Press RECORD button twice to start recording, press STOP
button to stop recording when you finished recording.
NOTE: Recording will be failed if press STOP button during the recoding.
5) DELETE TRACKS FROM U DISK
Plug U DISK into USB socket. Then press CD/USB button and press FUNCTION button to select
USB mode. During USB playing mode, press and hold the DELETE button on remote about 2 se-
conds to delete the current playing track in USB.
NOTE: Press and hold the DELETE button one time can only delete one track.
RADIO OPERATION
1) Press the POWER button at the front panel 1 second to turn the system ‚on' and set the volume
to a low level. Press MW or UKW button to select the MW or UKW band as desired. The tuner
backlight comes ‚on'.
2) Rotate the TUNING control to tune the desired radio station. If you tune to an UKW stereo station,
the UKW ST. indicator will light and reception will be in stereo. If you tune to a weaker UKW station,
the reception will automatically switch to mono.
3) When you finished listening, press the POWER button 3 seconds to turn the system off. The POWER
indicator and the tuner backlight go ‚off'.
Antenna Information
AM- The AM bar antenna is inside the cabinet. If AM reception is unsatisfactory try repositioning the
cabinet slightly until the internal antenna is picking up the strongest signal.
FM- the FM wire antenna is located on the back cabinet. If necessary adjust the position and direction
of this antenna until you find the position that provides the reception.
BLUETOOTH OPERATION (only 10021696)
1) Press the POWER button at the front panel 1 second to turn the system ‚on' and set the volume
to a low level. Press BT button to select the Bluetooth function.
2) Select from your portable device (Smartphone, Tablet...), the ID Bluetooth tagged as 'CBT', then
confirm connection.
3) Now you can transfer the music to 10021696 and all operations can only be operated from your
mobile device.
15