UNPACKING AND SET UP
•
Carefully remove the unit from the display carton and remove all packing material from the unit.
• Unwind the AC power cord and extend it to its full length.
• Unwind the FM Antenna wire and extend it to its full length.
•
Place the unit on a stable, level surface, convenient to an AC outlet, out of direct sunlight, and
away from sources of excess heat, dust, moisture, humidity, or strong magnetic fields.
• Raise the lid to expose the phonograph. The phonograph has been secured for shipment with a
transit screw. Use a coin or screwdriver to turn the transit screw clockwise. This will allow the
turntable to float.
•
Remove the opaque white plastic stylus cover from the phono-
graph stylus by sliding it in the direction of the arrow.
Discard the stylus cover.
•
Remove the twist-tie that was used to secure the tone arm
during shipment.
•
Release the tone arm lock lever.
•
Connect the plug to your AC outlet.
PREPARATION FOR USE
11