Zipper ZI-RPE 50 Betriebsanleitung Seite 29

 When tamping earth in the middle of a building the plate shouldn't touch the reinforced
concrete piles, the underground construction the ground of the machine and the
underground pipes.
 During workings in the inside of a building the plate and the eccentric block mustn't
strike the walls.
 When lots of machines work together, the distance between the front machine and the
machine that is behind it should be at least 10 m. The parallel distance shouldn't be less
than 5 m.
 When the machine works on soft or rough ground you have to decrease the engine speed
by using the throttle control so that the machine doesn't sink. When there is a descent
you have to take care that the plate compactor doesn't faint.
 You have to take care extremely in the following dangerous areas:
At tunnel workings you have to cater for a good ventilation to avoid accidents. There

must be a functioning control system for the supply of fresh air.
Near landlines there's a high danger of electrical shocks. Only the operator should be

in the working area when the working area is very dangerous.
During working and parking you have to take care of the stability of the machine to

avoid dangers.
ZIPPER MASCHINEN GmbH 
RÜTTELPLATTE / PLATE COMPACTOR ZI-RPE 50 / ZI-RPE 60 / ZI-RPE 90
OPERATION
Seite 29