VANTRUE OnDash N2S Bedienungsanleitung Seite 7

LED Indicator
Red light is keeping lighting on the
Emergency Button [8]
Red light blinks on the Emergency
Button [8]
Screen overview
Video Resolution
Emergency File Lock
Recording
Recording Time
(current clip)
3. Getting Started
3.1 Installing a Memory Card (Recommend VANTRUE Micro SD Card)
Please use a genuine Micro SD memory card from 32GB to 256GB with
a speed rating of class 10 or higher. We recommend use Vantrue Micro
SD Card (not included). Please insert the SD card when dash cam is off.
Carefully insert the memory card into the camera's card slot until it
clicks. To remove the card, power off the camera first, then push the
card into the slot until it clicks again.
Loop Recording Time
G-Sensor ON
G-Sensor Off
1440P+1440P 30FPS
Into Parking Mode
Time Lapse On
35MP/H
Recorded
Driving Speed
(KM/H or MP/H)
Camera is plugged into supply.
Camera is recording.
Infrared LED Auto
Infrared LED On
Infrared LED Off
MIC is ON
MIC is OFF
Memory card inserted
No Memory Card Inserted
1-4-2021
Current Date (MM/DD/YY)
and Time (24H)
Collision Detection ON
Collision Detection+Motion
Detection ON
Motion Detection ON
Low Bitrates Recording ON
GPS Signal Connecting
- 4 -