VANTRUE OnDash N2S Bedienungsanleitung Seite 18

3840x2160P 25FPS
4-1-2021
By default, the Loop Recording Time is 3 minutes. Please go to "Record
Setup" > "Loop Recording" to change it to 1 minutes, 3 minutes or 5
minutes or off. When Loop Recording is turned off, the camera will
record video in 20 minute clips, but will not overwrite old videos when
the storage card is full.
The loop recording video file name format is "Year_Date_Time_Seria-
lA". For example: "2021_01_01_060101_A", the suffix A indicates front
cam recorded files, while the suffix B refers to rear cam recorded files).
Standard files are stored in the "Video/Normal" folder. When the
microSD card is full, the camera will write over older files.
4.7 IR LED light
By default, the IR LED light is auto on.
Please note: If IR lights on, the video footage of the cabin will turn into
black and white.
1440P+1440P 30FPS
4-1-2021
IR Light Sensor
- 15 -