VANTRUE OnDash N2S Bedienungsanleitung Seite 26

When the camera is turned on again, it will record in time lapse
recording mode.
4.12 GPS Function
1.
Install the External GPS Mount onto the camera.
2. Plug the Type C USB Connector into the GPS Mount to power it.
Once charged, the camera will power on. Recording will commence
3.
if a microSD card has been inserted, just press the
recording.
4.
Press the
activate the camera's GPS function.
5.
The GPS receiver will start to search for a GPS signal, once the GPS
signal has been received, the GPS icon will be displayed on the
screen.
3840x2160P 25FPS
button to enter setup, go to "System Setup ">"GPS " to
3840x2160P 25FPS
4-1-2021
4-1-2021
- 23 -
Button to stop