VANTRUE OnDash N2S Bedienungsanleitung Seite 24

1440P+1440P 30FPS
4-1-2021
NOTE: In Motion Detection mode, if the dash cam is turned off manully,
it will not turn on and record even it detects any vibration.
In Parking Mode, the camera will exit Parking Mode if it detects any
vibration (Such as opening and closing the door, or moving the car from
rest, or other impact vibrations can be triggered), and enter the Normal
Video Mode.
In Parking Mode, if you set the Auto LCD OFF to Auto, the camera's
LCD will light off after 1 minute but the recording will continue with red
light blinks on the Indicator light.
NOTE: Since it is a super capacitor dash cam, to ensure the camera is
able to function in Parking Mode, please keep it powered with a
power bank or hardwire it directly to the car battery. We do not
recommend running the camera continuously for too long time.
4.10.4 Low Bitrates Recording
When the Low Bitrates Recording has been turned on, this is represent-
ed by an low Bitrates Recording icon at the bottom right corner of the
screen. If no movement is detected after 5 minutes of recording, there
will be an orange P icon appears in the center of the screen which
means Parking Mode is activated. Once the camera enter Low Bitrates
- 21 -