RIGOL DP800 Serie Benutzerhandbuch Seite 158

RIGOL
[1]
Beachte: :
The accuracy parameters are acquired via calibration under 25
[2]
Beachte :
The maximum time required for the output to change accordingly after receiving the APPLy and
SOURce commands.
[3]
Beachte :
The variation of the output within 8 hours after 30-minute warm-up when the load circuit and
environment temperature are constant.
5-6
Kapitel 5 Technische Daten
℃
after 1 -hour warm-up.
DP800 Benutzerhandbuch