Werbung
Verfügbare Sprachen
Verfügbare Sprachen
FILLING THE TANK
NEVER leave the structure in a vertical position without
adequate load in the base. It is recommended to use sand.
Place the base in the place where it will be used. Unscrew and
remove the cork.
1 First person: Tilt the base to a 45 ° angle.
2 Second person: Carefully pour sand into the base.
3 Let the sand fall down. Gradually lower the base as you add sand
to it
make sure it fills all the space. After filling, screw the cap back on.
Caution:
In winter, the water can freeze and damage the tank. It is
recommended to use sand.
Height adjustment:
As shown in the figure, Pinch the lifting handle bar in (HH), make the
rim up and down.
19
USER MANUAL
EN
Werbung
