As shown in the above ficture, install the backboard brace (T) and (S) on the top pole (W) by bolt (C1, C2,
C3, C4).
As shown in below figure, fix the top end of outer
lifter pole (HH) on the end of longer backboard
brace (T) by bolt (A1, A2, A3, A4). Please note that
sleeve (A2) must between the longer backboard (T)
and outer lifter pole (HH).
Fix the inner adjustment bar GG to the triangular
Q-profile with screws H1, H2 and H3.
17
USER MANUAL
EN