NILS ZDK020 Gebrauchsanleitung Seite 16

EN USER MANUAL
As shown in the bellow figure, pull the
backboard bracket (CC) in both side
Fix the rim (AA), back board (DD) and backboard bracket (CC)
by bolt (F1, F2, F3) and bolt (I1, I2, I3). Please note the 2 pcs
small springs (L) are fixed in front of the two up holes of the
rim (AA) by bolt (F1, F2, F3).
Fix the top end of backboard bracket (CC)
behind the backboard (DD) by bolt (K1)
As shown in the figure, connect the backboard brase (S) and (T) on
backboard bracket (CC) by bolt (B1, B2, B3,B4, B5). Please not that sleeve
(B3) must be installed inside the backboard bracket (CC).
16