Charging The Power Bank - AlzaPower APW-PBF26PDB Benutzerhandbuch

INSTRUCTIONS
Checking the power status of the power bank
Before charging your device, you should check the charge status of the power bank. Press
the on/off button and the display will show the current state of charge. If only one LED on the
front flashes, the power bank is less than 20% charged and needs to be recharged. If no LED
indicator lights up, the power bank is fully discharged.
When:
• one LED indicator lights up, the other LED indicator flashes: the power bank is charged
to 20-50%;
• two LED indicators light up, third LED indicator flashes: the power bank is 50-70% charged;
• three LED indicators light up, fourth LED indicator flashes: the power bank is 70-90%
charged;
• four LED indicators light up: the power bank is 100% charged.

Charging the power bank

Fully charge the power bank before using it for the first time. The power bank can be charged
using the USB-C connector. We recommend that you check the charge status of the power
bank before each use and connection to the mains.
• Plug one end of the charging cable into the USB-C port of the power bank and plug the
other end into your laptop's USB port or the port on your AC adapter.
• Charging will start automatically. The charging status of the power bank will be indicated
by the gradual illumination of the individual LED indicators.
• Disconnect the charged device from the power supply. The charging time of the power
bank may vary depending on the charger used and the USB port selected.
• To maintain the power bank's optimal performance and durability, we recommend re-
charging the device every 3 months when not in normal daily use.
• The charging time of the power bank may vary depending on the power adapter used and
the current battery condition.
ENGLISH 7