Charging The Power Bank - AlzaPower ONYX Bedienungsanleitung

INSTRUCTIONS

Charging the Power Bank

• Charge the power bank before using it for the first time.
• The power bank can be charged with MicroUSB connector.
• Plug the charging cable into the USB port of the charger or the USB port of your computer
and then into the MicroUSB power bank port. During charging, the four LED lights show
the current power bank charge level. Disconnect the power bank after the charging pro-
cess has finished. The charging time depends on the charger used.
• If you will not be using the power bank for a long time, charge/discharge it to 50% of its
power capacity and regularly check its charge level.
Using the Power Bank to Charge Your Device
• You can charge devices through the USB-A power bank ports.
• Plug the charging cable into the power bank and the other end into the device you want
to charge. If charging does not start automatically, press the button. During charging, four
LEDs show the current power bank charge level. When charging is complete, disconnect
your device from the power bank.
• The LED lights will turn off automatically after 5 seconds of inactivity.
ENGLISH 7