Product Information; Eped ® Can-Connector 1386Can; Intended Use - Assa Abloy eff eff ePED 1386CAN Installations- Und Montageanleitung

Fig. 1:
Product view
EN
20

Product information

ePED ® CAN-Connector 1386CAN
®
The ePED CAN-Connector 1386CAN is the communication interface between the
Hi-O Technology TM system bus and an automation control via CAN, based on the
CANopen protocol.
The ePED ® CAN-Connector is suitable for flush mounting in a deep switch box with
mounted blind cover from the switch range.

Intended use

The ePED ® CAN-Connector 1386CAN is the communication interface between the
Hi-O Technology TM bus and an automation control via CAN, based on the CANopen
protocol.
The module is suitable for flush mounting with a cover plate in a switch frame.
The ePED ® CAN-Connector 1386CAN is suitable for installation and use in accord-
ance with this manual. It is not intended for any other type of use.