Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Ribbon save (intermittent mode)
Keys:
,
,
,
Key:
Mode:
Selection of ribbon save mode.
Off: Ribbon save set to Off.
Standard: Maximum ribbon save performance.
Shift: Maximum utilization of transfer ribbon.
Mode: Standard
Rewind correction:
0 mm = It is always so far retreated that an optimal ribbon save is reached.
Default: 0 mm
−xx mm = The retreat can be made smaller.
+xx mm = The retreat can be made larger.
Key:
ExpertParameters (password protected):
Enter password, press key
indicated:
Key:
PhDownT = printhead down time in ms:
Is used from ribbon save algorithm to use for the calculation of start time of printhead upward
movement.
PHupT = printhead up time in ms:
Is used from ribbon save algorithm to calculate if a field ribbon save can be made or not.
Key:
PhVReactT = valve reaction time in ms:
The time is calculated when to start with printhead upward movement.
Key:
Tension / Ribbon Mode:
Tension: Indication of length that is transported forwards after measuring the transfer ribbon.
Ribbon Mode:
0: The transfer ribbon is retracted after each printout over the complete print length, i.e. no
ribbon save between the individual layouts.
1: The transfer ribbon is only retracted over the printed sector, i.e. the gaps between the
layouts were not optimised.
When changing the layouts, the transfer ribbon is positioned automatically
Mode: Shift
X-Shift and Y-Shift:
X-Shift: Indication of displacement of the printout in X direction.
Y-Shift: Indication of displacement of the printout in printing direction.
Key:
Lanes / R-Shift:
Lanes: Indication of number of lanes printed side by side.
R-Shift: Indication of distance when changing to a new lane.
Key:
ExpertParameters (password protected):
Enter password and press key
See mode 'Standard' for description of the parameters.
All manuals and user guides at all-guides.com
to confirm the entry and the following parameters are
English
to confirm the entry.
Dynacode
103
Werbung
