Werbung
Selection of the saw blade
• Select a saw blade that is suitable for the workpiece.
• The jig saw can be operated with different saw blades.
(For different materials)
Exchanging the saw blade
Before you mount the saw, you first have to check whether the mains plug has been
removed from the outlet.
• Loosen the two screws (A) using the Allen key included in the delivery.
• Place the saw blade (B) into the holding bracket (C) of the fret saw.
• Make sure that the saw blade lies in the groove (D) of the holding bracket as well as in
the groove (F) of the guide roller.
• The saw blade must be attached between the holding bracket (C) and the clamping
plate (E).
• Push the saw blade into the holding bracket as far as possible.
• Fix the saw blade by turning the lock (A) to the left.
• Slide the protective cover downwards. (5)
1247870_Stichsä g e_WB 600 PS_BDA.indd 17
1247870_Stichsä g e_WB 600 PS_BDA.indd 17
A
D
E
C
F
17
C
B
18.01.21 09:38
18.01.21 09:38
Werbung
