Werbung
Statement 340—Class A Warning for CISPR22
Warning
This is a class A product. In a domestic environment this product may cause radio interference in which case the
user may be required to take adequate measures.
Statement 1004—Installation Instructions
Read the installation instructions before connecting the system to the power source.
Warning
Statement 1005—Circuit Breaker
This product relies on the building's installation for short-circuit (overcurrent) protection. Ensure that the protective
Warning
device is rated not greater than:
15 A, 125 VAC; 10 A, 240 VAC; or 20 A, 120/240 VAC (US)
Statement applies to: Cisco Firepower Management Center 1000, 2500, and 4500
Statement 1006—Chassis Warning for Rack-Mounting and
Servicing
To prevent bodily injury when mounting or servicing this unit in a rack, you must take special precautions to ensure
Warning
that the system remains stable. The following guidelines are provided to ensure your safety:
•
•
•
Regulatory Compliance and Safety Information—Cisco Firepower Management Center 1000, 2500, and 4500
4
Regulatory Compliance and Safety Information—Cisco Firepower Management Center 1000, 2500, and 4500
This unit should be mounted at the bottom of the rack if it is the only unit in the rack.
When mounting this unit in a partially filled rack, load the rack from the bottom to the top with the heaviest
component at the bottom of the rack.
If the rack is provided with stabilizing devices, install the stabilizers before mounting or servicing the unit
in the rack.
Werbung
