Herunterladen Diese Seite drucken

Kesser K-WP-2186 Bedienungsanleitung Seite 20

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 3
20
WARNING:
*Please drain the water in the heat pump in winter or when the ambient temperature drops below 8 ° C,
otherwise the titanium heat exchanger will be damaged by freezing. In this case, your warranty will be
voided.
*Please always disconnect the power supply if you want to open the cabinet to get into the heat
pump, as there is high voltage current inside.
*Please keep the display controller in a dry area or close the insulating cover well to protect the display
controller from moisture damage.
1. Description
With your heat pump
- Water PVC connection diameter 30 - 38 mm (pieces: 2)
- User and service manual
- 1.5m electrical extension and socket with 30mA earth fault protection
- Anti-vibration base (pcs: 4)
2. Transport information
Delivery of the packaging
For transport, the heat pump is packed in a cardboard box. To avoid damage, the heat pump must be
transported on a pallet.
All material, even if transported at the supplier's expense, may be damaged in transit and it is the
recipient's responsibility to ensure that the delivery is in conformity. The recipient must note any
reservations on the carrier's delivery note on receipt if he finds damage to the packaging.
The heat pump must be stored and transported in a vertical position in its original packaging. If this is not
the case, it cannot be put into operation immediately, but a minimum period of 24 hours is required
before the power can be switched on.
www.eshopping.de
Hergestellt für Dilaw Warehouse GmbH // Fuggerstraße 15a // 48165 Münster // Germany

Werbung

loading