Miele A 612 Gebrauchsanweisung Seite 42

en - Areas of application
A 612/A 847 with
Erlenmeyer flasks
A 612/A 848 with
measuring flasks
42
The Erlenmeyer flasks rest on the support in the module frame.
The height of the frame should be adjusted so that the items do not
touch the water supply pipe.
The cone on the bottom of the injector nozzle should be inside the
neck of the item. This protects the rim from becoming chipped.
The measuring flasks rest on the support in the module frame.
The height of the frame should be adjusted so that the items do not
touch the water supply pipe.
The cone on the bottom of the injector nozzle should be inside the
neck of the item. This protects the rim from becoming chipped.