RHÉA-FLAM LUCERIA C 02 Installationsanleitung Seite 19

EN
Add 3. Heating and reloading
First open the
ap (Fig. 3
position -) before
tting. Set the air supply control to the open position. Follow the chapter in
this document: Product operation – 3. Heating and reloading. Close the
rebox door after adding. Wait for
ames to
appear in the
rebox. Close the
re damper (Fig. 19
position +). It is recommended to set the air control to the optimum
position at the rated output.
o not add fuel until the wood has burned down to embers.
Fig. Heating and reloading 1
–
7
Add 4. Termination of heating process
Close the air control and
re damper when the
rebox burns out (Fig. 19
position +). Closing the air control and damper
will prevent unwanted escape of accumulated heat into the chimney.
R H E A F L A M I n s t a l l a t i o n i n s t r u c t i o n s
19 | 29
19/29
LUCERIA C 02