RHÉA-FLAM LUCERIA C 02 Installationsanleitung Seite 18

EN
LUCERIA C 02
Fire damper
Add 2. Heating up
Set the air inlet control to the open position. If the appliance is equipped with a
re damper
open it (Fig. 3
position -).
Follow the chapter in this document: Product operation –
. Heating up.
Note: If you have selected a rear
ue connection when installing the product
manipulation of the damper is not necessary
(or even possible). In this case
the
ue gas
ow
ows indirectly into the chimney (not in the direct axis of
ow).
Fig. Heating up 1–11
R H E A F L A M I n s t a l l a t i o n i n s t r u c t i o n s
18 | 29
18/29