Werbung
WQ-T282H/E/Q
©
a
NEW FUNCTION
@® Twin Mechanism
In the twin
mechanism
of this unit, only playback will
function for Deck 1 (outer slot); and recording, playback,
fast forward, rewind, pause and the APSS will function for
Deck 2 (inner slot).
|
@
Mechanism MODE switch
Before
operating
Deck
1 or Deck
2, set the mechanism
MODE
switch to the position corresponding to the desired
type of operation.
Playback of Deck 1
It is possible to operate the PLAY < button of Deck 1 alone.
Recording, playback, fast forward, rewind, pause and APSS will
Playback of Deck 2
function for Deck 2.
Set position of
mechanism MODE switch
CONT PLAY
m2
It is possible to operate the PLAY < button of Deck 1 alone.
Continuous play-
back
When
Deck
1 reaches the end of the tape, the mechanism
MODE switch will automatically change to the
position
and Deck 2 will begin playback.
DUBBING
Dubbing will function for both
Deck
1 and Deck 2; fast for-
ward, rewind and pause will function for Deck 1.
Dubbing
When
only the PLAY < button is depressed, Deck 2 is played
back and the APSS will function:
at the time, the tape of Deck
1 is rewound although it produces no sound. When the PAUSE II
button is depressed during the dubbing, Deck 2 is put in PAUSE
mode while Deck 1 remains in playback.
Caution:
1. While
the mechanism
MODE
switch
is set to either the
CONT PLAY
+
position or the | 1 | position,
the
F FWD
«<<,
REWIND
»*,
and
RECORD ® buttons
cannot
be depressed; forcing these buttons could cause a
malfunction.
2. The
position
of the mechanism
MODE
switch cannot
be
changed
while
either
only
the
PLAY
<
button
or the
RECORD @ button is depressed:
forcing the switch could
Cause a malfunction.
Werbung
