PeakTech 6225 A Bedienungsanleitung Seite 9

Measuring environment:

These devices are only suitable for use in dry indoor areas and have no protection against
dripping or splashing water.

These devices are only suitable for use in dust-free indoor areas and use a fan for active
ventilation and ventilation slots for cooling the interior. A dusty environment can cause dust
to be sucked in and thus damage the device due to short circuits or insufficient cooling.

Avoid any proximity to explosive and flammable substances, gases and dust. An electrical
spark could lead to an explosion or deflagration - danger to life!

Do not carry out measurements in corrosive environments, the device could be damaged
or contact points inside and outside the device could corrode.

Avoid working in environments with high interference frequencies, high-energy circuits or
strong magnetic fields, as these can have a negative effect on the device.

Avoid storage and use in extremely cold, damp or hot environments, as well as prolonged
exposure to direct sunlight.

Avoid storage and operation in places with high, condensing humidity to prevent dripping
water in the appliance.

Before starting measurement operation, the device should be stabilized to the ambient
temperature (important when moving from cold to warm rooms and vice versa)
Maintenance and care:

Never operate the appliance if it is not completely closed.

Check the appliance and its accessories for damage to the insulation, cracks, kinks and
breakages before each use. If in doubt, do not use the appliance.

Switch off the appliance before changing the fuse.

Only replace defective fuses with a fuse corresponding to the original value. Never short-
circuit the fuse or fuse holder.

Maintenance and repair work on the appliance may only be carried out by qualified
personnel.

Clean the housing regularly with a damp cloth and a mild cleaning agent. Do not use
corrosive abrasive cleaners.

Do not make any technical changes to the appliance.
Attention!
Laboratory power supplies are not designed to charge batteries. Incorrect use can lead to
serious damage to the device or the battery, which is excluded from claims of any kind.
Cleaning the cabinet
Prior to cleaning the cabinet, withdraw the mains plug from the power outlet. Clean only with a damp,
soft cloth and a commercially available mild household cleanser. Ensure that no water gets inside the
equipment to prevent possible shorts and damage to the equipment.
9