Tannoy DVS 401 Schnellstartanleitung Seite 5

8
DVS 401, DVS 601, DVS 801
Introduction
Thank you for purchasing this Tannoy loudspeaker. This high-performance coaxial on-wall loudspeaker is ideal for installation
applications such as providing background and foreground music in bars, restaurants and shops. It has simple plug and play deployment,
with no external processing required.
Designed for a wide variety of sound reinforcement applications the Tannoy DVS is an ultra compact loudspeaker system capable of
delivering high sound pressure levels with extremely low distortion, resulting in outstanding clarity, definition and detail. A truly
universal solution, the DVS offers outstanding durability and resistance to scuffs and knocks. Able to deliver consistent performance
under a wide range of adverse conditions the DVS is suited to applications indoors or out. Available in black or white the DVS will
effectively blend into most backgrounds. Utilisation of the point source loudspeaker allows the DVS to be mounted on a wall or ceiling
in either horizontal or vertical orientations without affecting its performance. A range of hardware options ensures simple and effective
installation. Also available with built-in line transformer. For applications requiring extended low frequency enhancement, a range of
Tannoy sub-bass systems are available and can be used in conjunction with the DVS.
Features
• Full range surface-mount loudspeaker for indoor and outdoor installation applications •
DVS 401/DVS 401-WH
• • 25 Watts continuous, 100 Watts peak power
• • 4" paper cone, coated driver with butyl rubber surround for enhanced durability and long-term reliability
• • 0.79" ferrofluid cooled soft dome neodymium high frequency driver
• • Low insertion loss 25 W line transformer with easily accessible tapping switch
DVS 601/DVS 601-WH
• • 30 Watts continuous, 120 Watts peak power
• • 6.5" paper cone, coated driver with butyl rubber surround for enhanced durability and long-term reliability
• • 0.79" ferrofluid cooled soft dome neodymium high frequency driver
• • Low insertion loss 30 W line transformer with easily accessible tapping switch
DVS 801/DVS 801-WH
• • 60 Watts continuous, 240 Watts peak power
• • 8" paper cone, coated driver with butyl rubber surround for enhanced durability and long-term reliability
• • 1" ferrofluid cooled soft dome neodymium high frequency driver
• • Low insertion loss 60 W line transformer with easily accessible tapping switch
Common Features
• • 110° constant directivity dispersion for optimum coverage
• • EN54-24:2008 certified
• • UL 1480A certified for general signalling systems
• • UV and weather resistant UL 94 V-0 ABS enclosure
• • Multiple transformer taps for 70 V and 100 V line systems
• • All components weather resistant to IP64 for outdoor use
• • Stylish durable enclosure in a semi matt black or white paint finish fits unobtrusively in any environment
• • Painted perforated aluminium mesh grille with dust protection
• • Yoke bracket included for ease of installation
• • Phoenix* connectors input and link output
Unpacking
Every Tannoy product and accessory is carefully inspected before packing. After unpacking, please inspect your product to make sure no
damage has occurred in transit. In the unlikely event of any damage, would you please notify your dealer immediately and retain your
shipping carton, as your dealer may ask you to return the faulty unit to them for inspection.
Additional Safety Notices
WARNING: Before installing the loudspeaker, please consult the relevant construction codes in your region.
WARNING: When using a power driver to install the product it is essential to use the correct torque level settings to avoid
over tightening and damage to the wall material.
WARNING: In order to comply with the relevant fire safety regulations (ie. BS 5839: 1998), it is required that in the event of fire, that
failure of the circuit to which the loudspeaker is connected does not occur before evacuation of the building is complete. Suitable
measures include: - a) use of terminal blocks (for connection to primary) with a melting point of not less than 650°C, for example
constructed from ceramic materials; b) use of terminal blocks of a lower melting point but protected with thermal insulation; c) use of
terminal blocks such that, on melting, an open-circuit or a short-circuit does not occur.
WARNING: Some regional construction codes require the use of a secondary method of securing loudspeakers to provide security of a
backup support. The secondary safety suspension must be independent of the primary suspension points and capable of carrying the
total system weight. The additional safety device must be mounted in a way that the loudspeaker is caught by the safety device without
any drop and swing in the event that the primary suspension fails. Please consult the relevant construction codes in your region.
Tannoy will not be held responsible for any damages caused by the improper installation of these loudspeakers.
9
Quick Start Guide