Iberital IB7 Betriebsanleitung Seite 65

NOTE: Iberital recommends setting the following temperatures:
2.4.- HOT WATER DISPENSER
Place the cup or any other recipient under the hot water dispenser (8). Turn the hot water knob (18) in order to
begin dispensing water and turn it back again to stop it, or press the hot water dosage button if your machine
features one.
2.5.- STEAM DISPENSER
a) Twist the steam dispenser (9) towards the tray (15).
b) Open the steam tap (7), and in order to remove condensation let the steam flow out until no water
droplets accompany it.
c) Position the steam dispenser (9) inside the liquid recipient you wish to heat. Turn the knob (7)
to release the steam. In order to obtain a frothy cappuccino, keep the mouth of the steam ejector
close to the surface of the milk. This will create an abundance of foam/froth.
d) When the liquid has reached the desired temperature, close the steam tap.
e) Move the recipient containing the liquid, removing the steam dispenser (9) and aiming it at the
tray (15).
f) Open the steam tap (7) for a moment, in order to remove residue stuck to the steam dispenser (9).
Clean the steam dispenser (9) with a damp cloth or sponge.
2.6.- DAILY CLEANING OPERATIONS
2.6.1. Cleaning the filters and filter holders
Rinse the filters and filter holders in hot water. Leave them in hot water overnight in order to dissolve the grease
left by the coffee.
2.6.2. Cleaning the groups
- Machines without visual display
a) Substitute the normal filter (21c) or (21d) for the cleaning filter (blind) (21e).
b) Add two spoonfuls of detergent (special for group cleaning) to the cleaning filter (21e).
c) Insert the filter holder in the feed group.
d) Press the non-stop feed button and let it run for 20 seconds.
e) Stop the feed by pressing the button again; during the decompression of the unit, the hot water
and the detergent will clean the feed group interior.
f) Repeat this point (e) various times.
g) Rinse the unit and without the filter holders inserted press any feed button to eliminate any
detergent residue.
- Machines with visual display (automatic washing):
This function has to be carried out when the coffee machine is in the working position (hot machine). This option
will make the machine perform the cleaning function for the groups 7 times consecutively:
-
-
INSTALLATION AND OPERATION MANUAL
All manuals and user guides at all-guides.com
Hot milk not above 80ºC (176ºF).
Frothy milk not above 70ºC (158ºF).
Change of steam to water between 30ºC (86ºF) and 40ºC (104ºF).
Compensation for the real temperature of the milk, approximately 10ºC (18ºF).
15 seconds of feed
2 seconds at rest
IBERITAL
Page 65