Hama AWS-100 Bedienungsanleitung Seite 7

ADJUSTING SAME TIME FOR ANALOG (HAND) AND DIGITAL (LCD)
Ifthe time displayed on the LCD and on the hands are not the same, please
adjust them as following steps:
1.
4.
5.
6.
Press "ADJUST" key for 3 seconds to enter pre-adjusting mode until the
hand icon " ef " flashing on the LCD.
. Press and hold "ADJUST" key with the minute hand revolving quickly to
adjust the desired time on the hands.
. Press "SET" key with the Minute digit on the LCD flashing, then press
"ADJUST" key to adjust the Minute digit to be the same as the minute hand
indicates.
Press "SET" key again until the Hour digit on the LCD flashing.
Press "ADJUST" key to adjust the hour digit according to the value which
the hour hand indicates.
Press "MODE" key to save and exit the pre-adjusting mode.
NOTE:
1. In ex-factory mode, the analog time (hands) has been set at 2:00 before
delivery; It's the same as digital time(LCD) when insert battery. So you
needn't to adjust same time to receive RC signal when use the clock in first
time.
. When you replace new battery, the Analog & digital time might not be
the same; you must set both analog & digital time the same again before
running the clock and receive RC signal.
00
12
113913man_de_en_fr_it_nl_ pl pt ru.indd 12-13
©
> a SĘ gen 12 c PER
fo A: fo x Ñ To М \
d" at) | > jo з | =p | o a}
ja 4 de af I"
zum Vem Nr
Pre-adjusting Handsetting Minute (digital)
setting
SE EN
7 E = V 7 d = Y
jo з} P 1° з}
de p HAM Hi
Finishing Hour (digital)
display setting
MANUALLY SETTING THE TIME AND DATE
If you are out of the reach of the Radio Controlled Transmitter or if the
reception is not reachable, you can set the time manually. As soon as the
transmitter is received again,the clock will automatically synchronize with the
receiving time.
1. In normal time mode or Month/Date/Day mode, press and hold the SET key
for 3 seconds until the second digit flashing.
2. Press the ADJUST key to increase the value of the flashing digit.
3. Press SET again to step the setting items. The sequence is:
Second > Minute > Hour > 12/24 hour >Year > Month > Date > Time Zone
4. Press the ADJUST key to increase the value of the flashing digit and select
Time Zone.
5. If your local time is different from the RC received time, set the desired time
zone value by pressing "ADJUST" key when the time zone digit is flashing.
The available time difference is between -23 hours to +23 hours. After
13
07.08.12 08:23