Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
III.1) Food processor (A)
Description (Fig. 1)
A1 – Multifunctional head release button
A2 – Speed regulating knob
A3 – Bottom mount for adapters C1 - C4
A4 – Front mount for attachments D, E, H, T
A5 – Release button
B1 – Stainless bowl
The model you purchased includes the attachments and adaptors specified in the
able at the end of this language version of the manual.
Food processor control
– Tilting the multifunctional head downward/upward (Fig. 2)
When you press button A1 and slightly will lift the head upward. When you press button
A1 further and pushing the unit down will tilt the head downward.
– On/off switching of the food processor
Before you switch on the food processor, plug the power cord A10 into electric socket.
Then switch on the food processor by rotating the speed regulating knob A2. After you
finish working, switch off the food processor by rotating the speed regulating knob to
position 0.
– Speed control
Speed is controlled by setting the speed regulating knob A2 to the desired position within
the interval MIN - 1 - 2 - 3 - 4 - 5 - 6 - MAX. For short operation time at the maximum
speed, the regulating knob can be set to position "P" (PULSE). The regulating knob must
be held by hand in this position. Releasing the regulating knob will return it to position
0 and stop rotating.
– Multifunctional head attachment security safeguard
In order to disassemble the food processor and to remove the attachments from A4 front
mount for attachments, apply a reverse procedure. Before removing the attachments
from the motor unit head, you first have to push the release button A5.
– Blender security safeguard
The food processor cannot be switched on, if the blender cover A8 is removed, and the
blender is not correctly fixed.
Food processing time depends on the volume, type and quality of the processed
ingredients. It usually takes several minutes under normal conditions.
III.2) Whipping, mixing and flexi whisk, kneading hook
Description (Fig. 1)
C1 – Mixing whisk
C2 – Whipping (wire) whisk
A6 – Removable cover
A7 – Multifunctional head
A8 – Cover
A9 – Blender mount F
A10 – Power cord
B2 – Bowl lid
C3 – Kneading hook
C4 – Flexi (rubber) whisk
46 / 111
Werbung
Kapitel
