Santec OCEAN B7 Montageanleitung Und Bedienungsanleitung Seite 25

Description of the functions
Filling the bathtub
1. Switch on the device
After tapping the ON/OFF
icon, all touch-tronic icons
pulse two times and then
glow faintly. The SanTec
device will remain in standby
mode for 3 min.
1 x
OCEAN B7
2. Start filling the bathtub
Tap the desired fill level icon
to start the flow of water.
The selected icon lights up
brightly.
1 x
Safety flow arrest
After the water arrest time configured at the tub filling control
(see p. 19) has elapsed, the water flow will automatically
stop to prevent unintentional continuous activation.
3. Stop filling the bathtub
The tub filling function auto-
matically ends after the time
set for the fill level icon has
elapsed. You can also manu-
ally stop the flow of water
by tapping the activated fill
level icon again.
Filling time
1 x
SanTec OCEAN B7
Bath fitting
EN
25