Specifications - Santec OCEAN B7 Montageanleitung Und Bedienungsanleitung

Specifications

Operating voltage:
Magnetic valve:
Flushing stop:
Cleaning stopp:
Filling time:
Flow rate:
Water temperature:
Flow rate:
Water inlet:
Water outlet shower:
Water outlet bath:
Front plate:
Thermost handle:
Assembly
ATTENTION:
!
Only suited for wall mounting!
OCEAN B7
via power supply 230 V 50 Hz / 12 V=
Art.No. 117 899 - power supply for one control unit
Art.No. 113 792 - power supply for up to 5 control units
cartridge 6 V
set to 10 min by default (configurable from 10 s - 10 min,
manual program: 10 s - 60 s)
10 min (switchable)
set to 20 min by default (configurable from 1 min - 20min)
0,05 - 0,6 MPa (0,5 - 6 bar)
max. 70 °C (max. 80 °C for max. 10 min)
max. 20 l/min at 0,3 MPa (3 bar)
R 1/2" IG
R 1/2" IT
R 1/2" IT
Safety glass (ESG)
Chromed brass
Recommended mounting height
for the OCEAN B7 flush-mount set
12 - 17 cm
SanTec OCEAN B7
Bath fitting
EN
17