Herunterladen Diese Seite drucken

Miele SMUL1 Active Gebrauchsanweisung Seite 74

Werbung

en
Using the supplied accessories
(Fig. 19)
Miele offers a range of suitable ac-
cessories for many special applica-
tions (see "Optional accessories").
 Dusting brush
Accessory for vacuuming skirting
boards, carved furniture or orna-
ments.
The head can be swivelled to ad-
just the angle.
 Crevice nozzle
Accessory for cleaning in folds,
crevices or corners.
 Upholstery nozzle XL
Accessory for cleaning upholstery,
mattresses and cushions.
You can carry around 2 accessories
from the three-piece accessory set
while you vacuum (Fig. 20).
Multi Floor XXL Electrobrush (Fig. 21)
Follow the flooring manufacturer's
cleaning and care instructions.
Damage caused by trapped ma-
terial.
Risk of the flooring getting
scratched.
Make sure that there is no coarse dirt
or debris trapped in the bottom of
the Electrobrush, e.g. shards or
stones.
The Electrobrush can be used for daily
cleaning of carpets, rugs and hard
floors.
74
Tip: The suction tube is not a conveni-
ent option for cleaning carpeted stairs.
Tip: If you ever need to vacuum up sub-
stantial amounts of coarse dirt or
debris, use the PowerUnit solo (see "In-
stallation and connection – Using the
PowerUnit solo").
Use
Switching on and off (Fig. 22)
 If you have charged the battery in the
wall bracket, take the vacuum cleaner
out of the wall bracket.
 If you have charged the battery dir-
ectly, unplug the charger from the
charging socket on the bottom of the
battery.
For the best possible cleaning results,
always activate the ComfortClean
function before switching on the va-
cuum cleaner (see "Maintenance – Ac-
tivating the ComfortClean function").
 Press the On/Off switch on the Com-
fort handle .
Selecting the suction power level
(Fig. 22)
The suction power level can be adjus-
ted for the specific situation. Reducing
the suction power reduces the amount
of effort required to manoeuvre the
Electrobrush.
There are 3 power levels to choose from
on the Comfort handle:

Werbung

loading

Diese Anleitung auch für:

Triflex hx1 flash