Gewiss CHORUS GW 13 766 Bedienungsanleitung Seite 21

3.5
Insert the devices into a Chorus support, making sure the local command
button is at the top.Complete the installation with other Chorus devices or
hole covers and fix it to the relative container (flush-mounted box, wall-
mounted box etc). Apply the finish plate.
PROGRAMMING WITH THE EASY CONTROLLER
4.
Programming the actuator through the Easy base unit (code GW 90 831) or
with Easy Controller (GW 90 837 / GW 90 838 / GW 90 840).
The actuator channel to be used in the function that is to be created can
be selected at choice:
• by pressing the local command button: the corresponding channel will
be highlighted in the channel list;
• directly from the list of channels.
The functions can be created after the devices have been selected.
Refer to the Easy base unit or the Easy Controller documentation for further
information on the programming procedures.
Names of the functions
buttons
edges
timer mode
priority control
scene
COMPLETING INSTALLATION
Load activation or deactivation
Load activation or deactivation
Load activation with timer
Activation of priority controls
Activation of the scenes
21