Gewiss CHORUS GW 13 766 Bedienungsanleitung Seite 17

GENERAL DESCRIPTION
2.
2.1
The 1 channel 16 A Easy Actuator - flush-mounted, allows you to activate/
deactivate 1 electrical charge using 1 16 A relay fitted with 1 output
exchange contact (1 NO/NC).
The relay switching command can be given by Home Automation control or
sensor devices using the KNX bus, or they can be generated locally using
the front button.
The actuator is powered by the bus line and is fitted with a green LED
which indicates the output status. This device sends to the bus information
on the relay status (ON = NO contact closed, OFF = NO contact open) at
the ignition, at the reception of a command and when it is commanded
via the local button.
The actuator foresees the ON/OFF command for the load, the execution of
timer commands, scene management and the implementation of priority
controls to override the output status.
The various operating methods can be used simultaneously.
This means, for instance, that the device can turn a light on or off, or turn
it on or off automatically after a set time has elapsed according to the
command received.
The device is fitted inside a standard flush-mounted box, mounted on
Chorus supports in the space of two modules.
2.2
Activating and deactivating charges
The actuator channel activates or deactivates the electric charge when it
receives ON/OFF commands sent, for example, by a contacts interface or
a button pad configured in ON/OFF Cyclic switching or Edge management
mode.
The green LED comes on to indicate that the relay contact is closed.
SUMMARY
FUNCTIONS
17