Scheppach ELS1800 Originalbetriebsanleitung Seite 21

can be checked for damage.
• Use the envisaged cable suspension when attach-
ing an extension cable.
• Never pull the cable to disconnect the plug from
the socket. Protect the cable from heat, oil and
sharp edges.
• If the connecting cable is damaged, first disconnect
the extension cable from the socket. You can then
disconnect the connecting cable of the equipment.
• If the power cable for this equipment is damaged, it
must be replaced by the manufacturer, a customer
service agent of the same or a similarly qualified
person in order to prevent hazards.
6. Residual risks
Even if you use this electric power tool in ac-
cordance with instructions, certain residual risks
cannot be rules out. The following hazards may
arise in connection with the equipment's con-
struction and layout:
1 Damage to hearing if no suitable ear protection
is used.
2 Health damage caused by hand-arm vibrations if
the equipment is used over a prolonged period or
is not properly guided and maintained.
m Warning!
This electric tool generates an electromagnetic field
during operation. This field can impair active or pas-
sive medical implants under certain conditions. In
order to prevent the risk of serious or deadly injuries,
we recommend that persons with medical implants
consult with their physician and the manufacturer of
the medical implant prior to operating the electric
tool.
7. Technical data
Main voltage
Power Input
Working width
Scarifing depth
L sound pressure level
pA
L sound power level
wA
K uncertainty
Vibration at the handlebars
K uncertainty
Protection class
Protection type
Weight
230-240V~ 50Hz
1800W
380 mm
-12 / +6 mm
90,20 dB(A)
105,17 dB(A)
3 dB(A)
2,308 m/
s2
1.5 m/s
2
II
IPX4
12,7 kg
www.scheppach.com
Keep the noise emissions and vibrations to a
minimum.
• Only use appliances which are in perfect working
order.
• Service and clean the appliance regularly.
• Adapt your working style to suit the appliance.
• Do not overload the appliance.
• Have the appliance serviced whenever necessary.
• Switch the appliance off when it is not in use.
• Wear protective gloves.
8. Before starting the equipment
Before you connect the equipment to the mains sup-
ply make sure that the data on the rating plate are
identical to the mains data.
m Warning!
Always pull the power plug before making ad-
justments to the equipment.
The sweeper is delivered unassembled. The grass
basket and the complete push bar must be assem-
bled and mounted before using the sweeper. Follow
the operating instructions step-by-step and use the
pictures provided as a visual guide to easily assem-
ble the machine.
9. Montage
n Important!
You must fully assemble the appliance before
using it for the first time!
Guide rail assembly (fig. 3 - 8)
• Loosen the grip screw on the height adjustment
(9).
• Fit the lower handles (8) as shown in figures 4+5.
Make sure that the springs (4a/4b) go into the op-
posite groove respectively
• Subsequently tighten the grip screw again (fig. 5).
• Connect the upper push bars (3) with the middle
push bar (6) and the two lower push bars (8). To
do this, use four tensioning levers (5), fastening
screws (5a) and washers (5b). (figs. 6+7)
• Fasten the switch cable with the two cable clamps
(C) to the handle. (fig. 8)
Installing the catch basket
• Slide the catch basket (7) over the frame for the catch
basket and put the rubber tabs over (Fig. 9, 10)
• Hang the catch basket (7) into the device. To do
this, lift the discharge flap (11a) and hang the catch
basket (7) into the appropriate brackets on the de-
vice. (fig. 11)
GB | 21