Herunterladen Diese Seite drucken

Dometic RC10.4 90 Bedienungsanleitung Seite 24

Vorschau ausblenden Andere Handbücher für RC10.4 90:

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Setting up and connecting the refrigerator
The cooling device is equipped with an electronic device to protect against
reversing the polarity and short circuits when connecting to a battery. To protect the
battery, the cooling device switches off automatically if the voltage is insufficient
(see table below).
Switch-off voltage
Switch-on voltage
Connecting to AC mains supply
D
DANGER!
• Never handle plugs and switches with wet hands or if you are
standing in a puddle.
• If you are operating your cooling device on board a boat with
a mains connection from the land, you must install a ground protec-
tion circuit breaker between the AC mains supply and the cooling
device.
Seek advice from a trained technician.
➤ To operate the refrigerator with a AC mains supply, use a CoolPower EPS100W
or MPS35 rectifier.
7.5
Mounting the refrigerator
!
WARNING! Fire hazard!
• When positioning the device, ensure the supply cord is not trapped
or damaged.
• Do not locate multiple portable socket-outlets or portable power
supplies at the rear of the device.
!
CAUTION!
Only drill through the washers provided, otherwise foamed compo-
nents, including cables, can be damaged.
24
RC10.4 70, RC10.4 90
12 V
10.4 V
11.7 V
24 V
22.8 V
24.2 V
EN

Werbung

loading

Diese Anleitung auch für:

Rc10.4 7010 serie